How To Find Lost Remote Car Key?

As a car owner, you are bound to misplace your keys at some point. If you have a remote key, you may be wondering if there is an electronic way you can easily locate the key without having to search the entire house. According to automobile experts, here’s how to find lost remote car key?

Keys are traceable when it comes to vehicles that utilize keyless entry. These keys are known to produce certain signals that you can track. However, this is dependent on the kind of keyless entry your car uses. And also the kind of technology the manufacturer has added to your particular car model. In this article, we’ll be discussing this problem in detail.

Is There A Way To Locate A Missing Key Fob?

Before discussing how to find lost remote car key? please take a look at it? Even though they are known for being techy, there is currently no other way to track your car’s key fob. Several third-party options could help you out should your key fob go missing.

Key finders happen to be one of those options. A key finder is a tracking device that can be plugged into your key fob. These key trackers connect to your phone via Bluetooth. Even the cheapest key trackers have a range of dozens of feet.

Your key finder may include one or more of the following features, depending on the manufacturer you choose:

  • Make a noise to aid in your search.
  • Use GPS to find out where it is.
  • Once you’ve traveled a particular distance, the system will notify you.

After downloading the key finder app and attaching the key finder to your key fob. With the app, you can synchronize the key finder to your phone, which can, in turn, be used to locate exactly where the key fob is through the sound it produces.

How To Find Lost Remote Car Key?

The following steps can help you find your remote key in no time.

1. Check Yourself:-

Losing your key can cause you to panic, and you might forget to put it somewhere close. The first step will be to calm yourself down. It is most likely that the event happened at home, making it easier than in a public place. In situations like this, the most obvious places are the best places to start, and that includes yourself. So start by searching your pockets and any bag you may have with you.

2. Retrace Your Steps:-

Secondly, you should retrace your steps to the last time or point you could remember using your key. Search for the lost car remote key in places you may have likely dropped it upon exiting your car. This would include the grass lawn or bushes around your parking lot or any spot within and around those areas where your keys may have fallen or you may have absent-mindedly placed them.

3. Ask For Assistance:-

In finding a lost car remote, you can ask for help from a friend or family member close by. The other person may have seen you drop the key somewhere or perhaps even spotted the key itself. There is also the possibility of them going over the places you already checked and finding IT where may have missed them.

4. Check Inside Your Car:-

After exhausting every other likely spot, the best place to always go back to is inside your car. And if your car happens to be unlocked, it is more likely your key is lying in there somewhere. Check under the seats, floors, and hidden corners where your lost car remote key may be hiding.

5. Clean Up:-

Another useful hack is to carry out an emergency clean-up, which would guarantee you go through unlikely places you would normally have missed. This is particularly useful if you lost your key in the office or a workshop.

6. Go Through Common Spots:-

This would involve a thorough and systematic search of common places where you often keep your car keys. You may have unconsciously dropped it there and forgotten.

7. Use A Key Finding Device:-

At this point, your best bet would be to take advantage of your car’s electrical function by using a sonic key finder. Whenever the button is clicked, the key finder will respond with a glowing light and a unique sound. And if your key happens to be nearby, the sound together with the light will help you immediately to answer your question about how to find lost remote car key.

How Can I Track My Keyless Car Key?

Passive and remote keyless entry are the two primary types of keyless remotes that work in different ways. For you to send a signal via the remote on a remote keyless entry device, you only need to press a button. In most cases, these gadgets are just equipped with a transmitter. Unfortunately, this implies that you won’t be able to use the remote control.

Your chances are improved if you possess a PKE remote. You don’t have to press buttons to lock or open your automobile with PKE devices. The car sends a signal that turns on the remote and asks for a valid authorization number to open the vehicle.

Unlike a remote keyless entry device, a PKE remote, for instance, includes both a transmitter and a receiver, allowing it to hear you when you call it with a specified radio device. You may also make a gadget that acts as a radio sender and receiver, recording and retransmitting the signal from your automobile while checking for a signal from your keys.

How Does Key Finder Work?

Key finders communicate with your Bluetooth device to locate your key. For it to work, the finder must be within a specified range of the lost object. This ranges between 30 and 50 feet, depending on barriers and the number of Bluetooth devices in use.

The Bluetooth key finder’s tracking technology is based on radio waves, which are electromagnetic fields that bounce off things and allow your crucial finder to detect where the keys are.

The strength and signal strength determine the range of a Bluetooth key finder. When this problem arises, the best method to avoid it is to get a device with a larger range than you now have.


We hope the above mentioned information about how to find lost remote car key will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll try to solve your doubts as soon as possible.

How Close To Sidewall Can A Tire Be Patched?

One of the problems you can encounter when traveling by car is a punctured tire. Using a patch is a fairly common option to work around this issue. Yet, if the hole is in a position like a tire wall, the problem becomes much more complicated because it is likely that the defensive position will not be patched.

So, how close to sidewall can a tire be patched? A distance of 6 mm or more from the tire shoulder is required to fit a patch. In other words, if a crack is closer than 6mm, there’s almost nothing you can do about it!

First, let’s learn about sidewalls and how to identify them on your tires. The wall is the rubber part from the outer edge of the rim to the road surface. This part also has the largest area, is the most flexible, and continuously deforms under loads when moving.

How Close To Sidewall Can A Tire Be Patched?

The sidewall has never been an ideal part for applying hole patching. If the gap is 1″ pouring up, you can consider some measures to overcome or hold out temporarily until support is available. Within 1″ of refills, any remedial efforts will be pointless, and you’ll need to buy a new tire to replace it.

In the below section, we have compiled the most specific information about the three types of surface damage you will encounter. Scroll down for more information!

1. Understanding Sidewall Patches:-

If you look at the surface of this product, you will realize it consists of shoulders, crowns, and sidewalls. Inside it, sidewalls are located on either side of the tire to maintain the product shape. Shoulders firmly cover the crown. The hardest parts are the crowns, whose main role is contact and traction.

We want to remind you about these sidewalls more than other parts. They have a fairly smooth surface, consisting of many layers (depending on different models and manufacturers). Structurally, most manufacturers use polyester as the main ingredient. Some places even reinforced the product with another layer of nylon. That’s why they give the entire tire an incredible amount of stability.

Still, it is the above structural features that make the punctures on the sidewall become fatal to the entire product. Once this part is damaged, it is impossible to repair it. In this case, your only choice is to remove the old one and replace it with the new one.

2. Deadly Wounds:-

Regardless of the product’s model, the closer the puncture is to the sidewall, the slimmer your hope of repair. The sidewalls’ steel rings are difficult to repair, making the damage more fatal. However, how close to sidewall can a tire be patched? Once it’s 1″ or more away from the sidewall, you can safely find a remedy.

If you try patching a tire near the sidewall, you won’t be able to seal the holes completely. The humid outside air entering will destroy the tire quality from the inside. Once this goes on for a long time, tread separation is likely to happen unexpectedly to your vehicle.

Indeed, you may still be reluctant to take urgent measures. But this can only help your vehicle operate, and there is no guarantee of the distance behind. The performance of the car also decreased significantly. You will find out the decline in smoothness besides the decrease in speed.

3. Possible Solutions:-

Sometimes, it is impossible to be able to find out relevant replacement parts on your journey. These extreme circumstances will force you to use a patch (or plug on the sidewall) or continue with a flat tire. If you were in that situation, what would your options be? Our advice is to use temporary remedies until you reach the nearest auto repair station for those who are still wondering.

Driving for too long with a damaged tire will decrease the driving experience. Besides the decreased speed, the feeling of vibration is also another trouble it cause you. This also causes minor damage to the overall performance of your tires. Though some tires with minor damage are still repairable and working properly, you might need to throw them away if you insist on moving on a flat tire.

We suggest you cover them with a plug or a patch when the puncture is found at a safe distance from the sidewall. Considering tires with better bearing capacity will also reduce mid-road failures of this product. If the hole is in the sidewall, all efforts to fix it are futile. It would be best to try to move to the nearest repair station and replace it with a brand new tire.

How To Fix The Sidewall Damage?

We’ve discussed till now how close to sidewall can a tire be patched? Now, let’s see how to fix the sidewall damage. Here are some following steps through which you can solve this issue easily.

Step 1:-

You need to start by removing the tire from the wheel. Then, you need to use specialized tools to disassemble the fixing nuts.

Step 2:-

After successful disassembly, check for holes and remove every stuck object (such as screws, dead branches, or nails). Completely remove the air in the tire and give a little cement to the plug.

Step 3:-

Next, you need to clean the puncture and refill its air. After applying a sufficient amount of sealant to the plug’s center, plug it in to complete the patching process.

Step 4:-

Cut the excess ends of the plug on the outside, then reinstall the wheel and inflate the product. The last step you need to complete is fixing the nuts and shooting the tire to the wheel tightly.


1. How Long Can You Drive on a Patched Tire?

A patch, if done properly, can last from 8 to 1 year. But the quality and durability will go down if you do this measure many times. This measure will not guarantee you the same performance, speed, and smoothness. You would still face the risk of blowouts and damage along the way. Therefore, you should consider getting a new tire for the safest travel experience.

2. Can You Patch A Tire On The Side Of The Road?

If you are facing this problem, it would be best to combine patching with another reinforcement measure. Patches can be helpful with punctures that are easy to fix but are not so effective on the tire side. Therefore, the best way is to insert an extra tube inside the wheel to maintain the product shape in the best way.

3. How Fast Can You Drive On A Patched Tire?

If you patch your product properly, it can still give you the ideal speed experience. Specifically, you can hit 80 mph with a patched product.


We surely do not expect to encounter vehicle problems during their journey. Once that happens, understanding and mastery of the new approach is the key to solving your problem quickly and efficiently. The above-mentioned information about how close to sidewall can a tire be patched? will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll definitely try to solve your doubts as soon as possible.

How To Tell If Your Car Is Bugged?

Have you been wondering how to tell if your car is bugged? When it comes to tracking devices, there is a lot to discuss. If you feel something unreasonable in your car, it seems that your vehicle has some recording or tracking device in it. In this article, we’ll be discussing.

What Does It Mean If Your Car Is Bugged? 

Surveillance cameras are growing in trend because these devices are durable, practical tiny, and effective these days. The nosy people are using these devices and technology to poke around the businesses and things of other people. Since 1940, hidden cameras and tracking devices have been used in homes and cars.

Bugs are tracking devices that can be installed in rooms and cars. The bugs are small and use a simple microphone that listens to transmit and record conversations. Some types of bugs can transfer their signals to the sources outside because they need small stations to pick up the transmission from your vehicle through spying equipment.  Therefore, if you notice strange vehicles having dark and tinted glass windows, it seems that video cameras are in them.

The GPS tracking devices can track the vehicle’s location and track the real; time depending on the model of the car. Many individuals know about the vehicle tracker processes and technology using different applications like fleet management, personal recovery, theft recovery, personal safety, and many more.

How To Tell If Your Car Is Bugged? 

Take a look around your car. Don’t just do a quick cursory glance; really look. Is there anything out of place? Is your mug sitting in the same position it was in when you last used it? Have you always had that tissue box in the backseat? Do the items in your glovebox check out?

Do a full sweep around your car. People with less-than-noble intentions situate bugs in places you least expect. If the tracker knows what they’re doing, they won’t place the device in an obvious location. They might even place it inside the car’s electronics, where it’s away from prying eyes and hands. Here are some target locations to check:

1. Underneath The Car:-

Look underneath the car and check behind the wheels. Search for suspicious devices such as a mini antenna, a taped object, or a small unknown box. If you’re not sure whether the strange device belongs to your car, consult the car’s manual or ask a mechanic.

2. A/C Or Dashboard:-

Shine a flashlight in the car’s air conditioning system or behind the dashboard. Dissemble the compartment below the car’s steering wheel so you can check underneath the dashboard properly. If there’s a wire taped inside, it’s one of the first things you’ll spot.

3. Hood:-

Open the hood and give the engine a good once-over. Pay extra attention to where the battery is located, as it tends to have a bit of space to squeeze a device in.

4. Data Port And Seating:-

Check the data port, as devices can be inserted into the port directly. You’ll find the port underneath the driver’s seat. While you’re there, check both sides of the seating. If possible, detach the removable parts so you can check the seating more thoroughly.

5. Pay Close Attention When Answering Your Phone:-

If there’s a bug inside your car, you’ll notice strange interferences while you’re on the phone with someone. You might hear static, scratching, or popping noises on the other end, or sounds coming from your phone’s speakers even after you’ve hung up. You’ll also receive an odd number of calls while you’re in the car but no one is on the other line.

If the tracker used a line extender, an infinity transmitter, or a harmonica bug on your car, you’ll hear an extremely faint or high-pitched beep for just a split second whenever you’re answering your phone. If it happened only once or twice, it might just be a modem or fax machine calling the wrong number. But if it happens often, there’s definitely something fishy going on the other end of the line.

6. Turn On Your Phone’s Radio:-

Some tracking devices, like those found in SpyShop bugs, use frequencies within or near the FM radio band. These signals silence the FM radio when it’s in close vicinity of the bug. Use your phone’s radio to search for transmissions at far corners of the FM radio band.

Turn off the “stereo” function so the radio operates in “mono,” as it’s far more sensitive to FM frequencies than the former. Then, move it around your car until the radio begins to squeal. This squealing noise is known as feedback detection or loop detection. If a certain area in your car squeals more than other areas, contact the TSCM (Technical Surveillance Countermeasure) team to do a thorough search of your car.

Therefore, if you’re wondering how to tell if your car is bugged? then refer to this above information.

What Should I Do If I’m Bugged?

If you find a bug in your car, here are some important measures to take:

  1. If the bug is wired, don’t rip it out as it might get damaged. Instead, bring the device to the police or contact a TSCM specialist so they can track the person behind the bugging.
  2. If the bug is attached with magnets or adhesives, remove it but don’t destroy it. Again, take the bug to the authorities so they can track the person invading your privacy.
  3. Until the bug is inspected by the authorities, don’t answer or use your phone inside your car. If you have to talk in your car, don’t voice your suspicion about the bug.
  4. Don’t talk about sensitive or private information while riding the car with another person.
  5. Be discreet when sending texts or emails to the TSCM or the police.
  6. Never use a laptop or an electronic device inside your car.
  7. If you’re not bringing in someone for a TSCM inspection, schedule a Vulnerability Analysis or Threat Assessment as soon as possible.
  8. If you can’t find the bug but still suspect it’s in your car, contact a professional to do a full sweep of your vehicle.

Hence, we’re done discussing how to tell if your car is bugged? Now, look at some measures to prevent your car from getting bugged.

Frequently Asked Questions:-

1. How do you trace if the car is bugged?

You can easily find out if transmissions bug the car at the end of the FM radio band and any quiet area within the FM band. When the squeal becomes too loud, the car will begin to back up and fill with air. This is often when the bug is located. If you slowly move the radio around the car, you can carefully avoid hitting your head on objects as you navigate through your city.

2. How can I detect the listening device in my car?

Check the wheels of your car, as it is possible that there can be a magnetic device in the car, and you can’t see well. Look into the undercarriage and use a mirror to check under the car for any device. Check behind the bumpers as well and the empty spaces.

3. How do I block the listening device?

Get an audio jammer; it is a technology used to protect or promote thegns from secret conversations. It is also a self-protection device, listening post, or signals intelligence instrument. These devices are becoming more and more popular as tools for tracking and monitoring hidden microphones. You can also place the listening device in the car to listen to the device if present. Test the effectiveness of the audio jammer.

4. How do I find hidden listening devices in my car?

The specialized cameras that can fit your cars use either the infrared scanner or IR and noticeable light emitters to find the listening devices in homes and especially in cars. You can also use a flashlight to find the sparkle of a camera lens affecting light back.


This concludes this article on how to tell if your car is bugged!

When it comes to your privacy and security, you can’t be too careful or cautious. Even if you don’t find a bug, you’ll at least rest assured knowing that no one’s out to track your every move.

When you find some listening device or any bug, you should disable or destroy it. As it will be better to inform the police quickly without being noticed. Because it is illegal to mount any eavesdropping devices in any jurisdiction in the US. That’s why it is best to locate the device and report it to the higher authorities. Hiring and asking for a private investigator is essential.

Car Losing Oil But No Leak Or Smoke?

As your vehicle gets older, it’s not very rare for the vehicle to consume more oil over time of use. While this is true, if your vehicle is losing too much oil, the problem can be concerning. The question always remains, my car losing oil but no leak or smoke; what is the solution? Usually, your car’s most common cause of losing oil is an oil leak or burning too much oil. However, if you don’t see any signs of oil leaks or oil burns, the problem could be a little different.

This article helps you understand the different reasons beyond your car losing oil but no leak or smoke. In addition, the article helps you understand the purpose of your engine oil and the complications that could result from low engine oil.

How Does Engine Oil Work?

Your vehicle’s engine oil is an essential lubricant for your engine’s working components. They serve a range of purposes. This involves enhancing the engine’s operational effectiveness, reducing corrosion and rust, cooling your engine, and reducing wear. Some engine oils include chemicals that remove engine residues and improve fuel efficiency.

Engines require proper lubrication to operate effectively by minimizing friction between moving components. Therefore, preventing corrosion of metal components and maintaining engine cool by eliminating heat off the engine.

Additionally, engine oil helps remove grime and prolong your engine’s lifespan. Friction could expedite components’ deterioration or total failure, necessitating expensive car repairs. The oil prevents moving components from coming into contact with one another.

What Are The Causes Of The Car Losing Oil But No Leak Or Smoke?

There’ll be no oil dripping on the ground. It’s not as easy as replacing a seal if your automobile is losing or burning oil but not leaking. The problems are far more severe. Once your engine begins to burn oil, you must act immediately. There’s a good chance your engine has internal damage that’s expensive to repair. This might be due to several factors, which we shall discuss below.

1. PCV Valve Problems:-

A faulty PCV valve can often lead your vehicle to lose oil without a leak or smoke since it blocks the oil’s normal flow. Increased pressure causes cylinders to lose oil. Moreover, it might result in a fire accident. As a result, you’ll have to provide your vehicle with more oil than it usually requires.

2. Worn Piston Rings:-

No internal oil leak or PVC problem? Then, examine any internal engine efficiency issues. Regardless of the engine type, there are a variety of unseen components that might contribute to excessive oil leakage. Typically, piston rings stabilize the engine and prevent oil leakage. However, with time they deteriorate and can no longer safeguard your cylinder. One leak progressively draws another. Consequently, significant oil loss occurs.

3. Internal Oil Leak:-

Yes, there’s no visible oil leak on the ground.  However, there could be a little oil leaking internally from your car, which you can’t detect. Occasionally, your automobile might leak oil via extremely tiny cracks or damaged pipes. Still, it’ll not produce a large pool of oil beneath your car or produce unusual smoke.

Typically, oil leaks are apparent, and even if you can’t detect them, your car will activate a warning light. To verify that your vehicle’s oil loss is not the result of an oil leak, you must take it to a skilled technician.

4. Blown Head Gasket:-

Your head gasket problem might cause your car’s oil to leak. Typically, they protect each engine cylinder. Unfortunately, if they’re compromised, the oil may easily seep out. If a problem emerges here, that would be quite a difficult situation.

5. Circuit Related Problems:-

A problem with the circuit might result in the car losing oil but no leak or smoke. This will occur if the car’s numerous electrical systems fail to push oil from the engine to its many destinations. There’d be a loss of pressure in your oil pump, portions of your engine, and various vehicle components if this is the situation.

6. Dirty Oil:-

Unclean engine oil can’t circulate and lubricate as effectively as to clean engine oil. Dirty oil can lead your engine to waste oil without leaking oil or producing smoke. The oil coating causes this with grit and other foreign particulates that obstruct oil flow. The dirt might enter your engine and cover the bottom of your engine walls or other components. This wear and strain might result in oil leaks, which are difficult to identify if there is no visible engine smoke.

7. Internal Engine Damage:-

When internal engine components are compromised, it can result in oil leaks that aren’t visible from the outside. If your car’s engine is internally damaged, this might result in a leak that does not emit apparent smoke or leakage. This could also occur whenever the piston rings become worn and loose, resulting in a loss of power that only adding extra oil can compensate for.

8. Tiny Holes:-

An engine can lose oil without seeing visible leaks or smoke. This happens whenever a tiny crack in an oil seal doesn’t allow sufficient pressure to exit, preventing your vehicle from exhibiting noticeable leaks. These microscopic holes are more prevalent in older cars, particularly if they have suffered damage that is difficult to identify from the outside.

What Is The Repairing Cost To Fix?

The repair expense of an engine oil leak differs based on the type and size of the leak and the complexity. For instance, repairing an oil leak from the rear primary sealing costs about $200, but repairing an oil leak from the cylinder head or crankshaft costs around $500.

Depending on the complexity and origin of the leak, the cost of correcting oil leaks might vary. In addition, if your vehicle is quite old, you might have to repair significant engine components and fix the leak. If the leak source is determined to be a seal, the repair will be less expensive than if it were a gasket.

Typically, seals cost less than $200, but gaskets cost between $400 and $600. The anticipated cost to fix an engine oil leak varies depending on the brand and model of the vehicle. Due to the additional effort required to complete the task in a hurry, the price will be higher.

What To Do If Your Car Loses Oil Without Any Leak Or Smoke?

In the occurrence of a car losing oil but no leak or smoke, you must check your oil level and replenish it as necessary. There’s a possibility that your oil is rapidly dropping if your engine is overheated or operating hot for an extended period. It’d be best to visit a repair shop or a specialist in this situation.

Meanwhile, it’s advised not to operate your vehicle; instead, have it towed off the road. If you see a severe oil leak while driving, you must quickly pull over and turn off your engine. Restart your vehicle when the oil indicator light is gone. Call a technician and take your car to the nearest auto repair for diagnostics if you can’t fix the issue on the spot.


We hope the above-mentioned information about the car losing oil but no leak or smoke will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll definitely try to solve your doubts as soon as possible.

Why Does Car Turns Off While Driving But Turns Back On?

When you own a car, it is your responsibility to care for it. Many car owners seem to think a car runs on magic dust. You have to continually check oil, gas, coolant, etc., to make sure your car stays fit for a long time. In modern vehicles, there are many sensors and functions to make your car run smoothly. Having basic knowledge about your vehicle can help you counter a mechanical problem like your car shutting off while driving.

If your car turns off while driving but turns back on suddenly, it can often be due to a bad fuel pump. Your engine needs a precise supply of fuel at a precise time as input for combustion to generate power, and the fuel pump is the part that supplies the engine with the correct amount of fuel. In this article, we’ll shed on the reasons for this issue so the next time it happens; you are well-prepared. 

Why Does Car Turns Off While Driving But Turns Back On?

The most common reason a car shuts off while driving is due to a bad crankshaft position sensor or issues with the fuel system. It can also happen due to a bad alternator, ignition switch, empty fuel tank, or car engine sensors problems.

1. Faulty Crankshaft Position Sensor:-

The most common reason a car shuts off while driving is a defective crankshaft position sensor. The crankshaft sensor is necessary for your car engine to run on most car models. You also have a camshaft position sensor on some car models, which the car uses if the camshaft sensor is faulty. Here, a faulty crankshaft position sensor may not cause the vehicle to stop entirely. However, if your car is equipped with a crankshaft position sensor but not a camshaft sensor and you get a trouble code on it, you need to replace it.

2. Faulty Fuel Pump:-

A fuel pump supplies the engine with the correct amount of fuel. If the fuel pump does not provide the right fuel to the engine, the motor will shut off, and you will be left stranded. A fuel filter is a small component whose only job is to clean the fuel that goes into the engine. If the fuel filter is clogged, the fuel entering the system will be insufficient, and the engine will shut down. Fortunately, it is easy for you to replace a fuel filter. If your car turns off while driving but turns back on suddenly, it can often be due to a bad fuel pump.

3. Empty Fuel Tank:-

If you have sufficient fuel for your drive, that is perfect, but if your fuel gauge or fuel level sender has gone faulty and does not show the real fuel level in your car, you could have a big problem. An easy way to try if there is a problem with your fuel gauge or fuel level sensor is to fill 1 gallon (4 liters) of fuel to see if it starts.

4. Alternator Problems:-

An alternator manages the supply of electricity in your vehicle. If your car suddenly stops running, the alternator may have gone bad. A faulty alternator will cut the power supply to vital car components, and you will notice the lights turning off in the dash or the engine abruptly losing power.

5. Faulty Ignition Switch:-

Sometimes, a faulty ignition switch can cause your car to shut off while driving. The ignition switch is installed behind the ignition lock and get’s turned while you turn the key to start the car. Inside this switch, tiny metal plates can build up corrosion and rust. If this happens, one of these plates may lose connection, and the whole ignition will get switched off. This will also cause the whole engine to shut off immediately.

6. Malfunctioning Sensors:-

Modern cars have many sensors to optimize the air-fuel mixture for optimal fuel consumption. If one sensor fails and is off, your car engine might die altogether. Sensors like the MAF sensor, Coolant temp sensor, and Oxygen sensor could mess with the air-fuel mixture so much that the engine would die.

How To Diagnose A Car That Shuts Off While Driving?

Diagnosing a car that shuts off while driving can be difficult if the problem comes occasionally. However, it is much easier to find the problem for a car that just died after driving.

Step 1:-

Check for any trouble codes in the engine control unit with an OBD2 scanner. Continue the diagnostics of the trouble code if you get any.

Step 2:-

Fill the tank with 1 Gallon or 4 liters of fuel to ensure the fuel level is good, and there is nothing wrong with the fuel level gauge.

Step 3:-

Check the battery voltage and connect a car battery charger to make sure the battery charge is good.

Step 4:-

If you can start your car after the charging of the car battery. Measure the voltage with a multimeter while the car is running. If it is 13.5-14.5 voltage, your alternator is fine, but if you get under 13 volts while the car is running, there is something wrong with the alternator system.

Step 5:-

Check if the engine has correct fuel pressure with a fuel pressure gauge. If not – check the fuel pump and fuel filter. Replace if faulty.

Step 6:-

Check live data with your diagnostic tool and look for any strange values from the engine sensors. Check if you get RPM from the crankshaft sensor when cranking the engine.

Step 7:-

Check the RPM meter on your dashboard while cranking the engine on the starter motor. If it doesn’t move – the problem is most likely the crankshaft position sensor.

Therefore, these are some diagnosing steps for the problem car turns off while driving but turns back on suddenly.


1. Can low oil cause a car to shut off?

Low engine oil levels do usually not cause your car to shut off. However, if it is so low that your oil pressure is getting low – the car can shut off the engine for safety reasons. This is often in newer cars, though.

2. Can a bad battery cause a car to shut off while driving?

A bad car battery rarely causes the engine to shut off because the alternator gives the required power it needs. It can be such a short circuit in the car battery in some rare cases, so it will shut off, though.

3. Why does my car keep cutting off when I stop?

If your car shuts off after you stop, the engine is very sensitive at idle. This can be caused by many things but is usually caused by a lean fuel mixture, causing the idle to drop too low. A faulty throttle body can also cause this.

4. Why did my car shut off while driving and won’t start?

If your car shut off while driving and it won’t start, it is often caused by a faulty alternator or low fuel pressure caused by the fuel pump. However, many things can cause it, and it needs to be diagnosed with a diagnostic scanner.


We hope the above-mentioned information about the car turns off while driving but turns back on suddenly will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll definitely try to solve your doubts as soon as possible.

Where Do The Clips Go On Brake Pads?

You might be wondering where do the clips go on brake pads? They are the tiny plastic pins that hold the pads in place. These are typically hundreds of dollars, but they can be a fraction of the price. The clips are necessary for the proper functioning of the brakes, and they should be replaced regularly. These little anti-rattle clips are what prevent your brake pads from becoming loose in the caliper. They reduce the wear and tear that excessive driving puts on your brake pads and improve your safety and performance capabilities.

In most cars, pillar clips are used. The clip should fit the thickness of the bracket. The spring should pull the brake pad from the rotor. Putting the spring on the wrong side can make your brakes rattle or feel very quiet when braking. Eric the Car Guys recommends putting the clips on the bottom side. The shim should be in the middle, which will prevent the pad from pulling on the rotor. Then, remove the old brake pads. The clips are attached to the rotor. If your brakes aren’t vibrating while braking, you might need to replace them.

What Are The Clips On Brake Pads?

Before discussing where do the clips go on brake pads? Firstly, we’ll discuss what are the clips on the brake pads? Most vehicles come with integrated clips to keep brake pads on. These clips are designed to be on the proper side of the spring, which pulls the pad off the rotor when it is pushed onto it. If the clip is on the wrong side, the brakes may rattle while driving or be quiet when braking. In the past, manufacturers used pressure-sensitive adhesive to hold the shim to the rotor, but these days more OEMs are using springs to push the pads away from the rim and the rotor.

In most vehicles, abutment clips reside on the caliper bracket lands. They prevent the pads from slipping off the rotor and create an even surface for the brakes. Some abutment clips are even made of fingers to hold the brake pad in place. These clips also prevent squeaking when the car applies the brake. These brake pads contain a metal tab that will rub against the rotor when the car is stopped.

Most vehicles have abutment clips, which reside on the caliper bracket lands. They create a uniform surface for the brake pads. Some have fingers that hold the pad in place. Most pads have metal tabs to indicate how thin they are. These metal tabs cause the brake pads to rub against the rotor, causing squealing noises when the car applies the brakes.

Where Do The Clips Go On Brake Pads?

The clip on the new brake pad is attached by two screws that fit between the pads and rotor. It pushes the pads away from the rotor, insulating the brakes from vibration and noise. However, some people have complained that the clip causes the brakes to vibrate and be noisy, so a new clip is needed to correct the problem. In addition to the clip, there are other components that help to keep the car’s brakes in good condition.

Abutment clips are the most important parts of a braking system. It is also used to hold the brake pads to the rotor. They are designed to hold the brake pads in place and are an important component. But because they are consumable parts, they can rust or wear out and fatigue their anti-rattle features. Moreover, a new set of abutment clips may improve the performance of your car’s brakes. If you’ve ever noticed that your vehicle’s abutment clips are wearing out too quickly, you should change them.

New brake pads usually come with retaining clips. Those clips will go on the left or right side of the rotor. If you have a left-hand vehicle, you’ll have a left-hand clip. You’ll need to remove the old one and replace it with the new one. These new clips will keep the brake pads in place, preventing squealing and rust.

How Do You Install Brake Pad Clips?

Remember that left-handed and right-handed clips and brake pads will go on one side or the other. So it will be best to change one at a time. If you’re more of a visual person, think about this: at the back of the caliber, you’ll see 2 different shape twisting spring clips. Those springs are what hold the retaining pins in place and they also hold the brake pads, Ian, as well.

Keep in mind that brake pad quote clips easily snap play too when installed correctly. Using graphite-based grease the clips will also keep the brakes from squeaking. Each caliber will have a set of metal clips in the removable area of the caliper and those clips will push into the sides of the caliper and the brake pads will essentially slide into them.

Check out the steps below:

  1. Raise your car and remove the wheels
  2. Remove the existing retaining clips and pads
  3. Remove the retaining pins
  4. Inspect your new pads against the old ones
  5. Compress the piston back into the caliper
  6. Test fit your pads and replace pad shims
  7. Prepare and install your new pads
  8. Install your new retainer pins and retaining spring clips
  9. Reinstall your wheels and lower your car
  10. Take your car out for a test drive to make sure everything is in tip-top shape

It is compulsory always to read your packaging and stay aware so that you know if you’re using the appropriate clip for the appropriate side or not.

After completing the above steps, you have basically saved yourself hundreds of dollars, gained a new experience, or enhanced your current mechanical skills and hopefully, you had a little bit of fun. Throw out any of the old brake materials that you used properly and call it a day.

How To Remove The Clips That Go On Brake Pads?

We’ve already discussed where do the clips go on brake pads? Now, take a look at how to remove the clips that go on the brake pads?

After you’ve removed the clips holding the old brake pads, you’ll need to remove the spring clips that secure them. These spring clips vary in placement and design, but in general, you can remove these clips with pliers. However, if you’re unsure of how to do this, you should check the manual for your car or consult the manufacturer of your vehicle. Some pads also have tension clips on the backing plates and may require wedges to be removed.

Next, you’ll need to remove the retaining clips. Most brake pads have a metal wear indicator on the bottom, which indicates that you should replace them. You’ll also need to remove the old calipers. You’ll need to carefully slide out the old pads and slide in the new ones. Make sure that the retaining clips on the new pads match those on the old pads.

If you’re replacing brake pads, you should also replace the retaining clips. While some retaining clips are difficult to replace, the right clips can improve your car’s brake performance and extend the life of the pads. The clips go on the brake pads and push them away from the rotor to increase friction and reduce noise. In fact, some manufacturers of new braking pads include new retaining clip sets with their brake pads, making the process easier.


We hope the above-mentioned information will answer your question about where do the clips go on brake pads? and will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll try to solve your doubts as soon as possible.

How To Extend Car Battery Cables?

The world of cars is a complex and ever-evolving place. With so many different models, makes and types of vehicles on the market today, it can be hard to keep up with what’s new in the industry. Have you ever wondered about how to extend car battery cables? One thing that has not changed much over the years is how we charge our car battery at home or in an emergency situation.

How Does A Car Battery Work?

To determine what works and doesn’t work in a car, it is beneficial to have a working knowledge of its components, even if you are not an expert automotive technician. Although a car battery has numerous features, let’s examine some of the most important ones:

Battery terminals and cables connect the battery to the vehicle’s electrical system. The chemical composition of a car battery is the “battery acid” or “battery paste.” The battery cell comprises a series of positive and negative plate blocks that conduct electricity.

In simple terms, a car battery works by converting chemical energy into electrical energy. It needs to start the vehicle and power electrical components such as the lights and radio. A chemical reaction occurs when hydrogen, oxygen, lead, and sulfur come into contact.

What Causes Battery Cable And Terminal Corrosion?

When your vehicle heats up and cools down, so does the battery. During this phase, it releases hydrogen gas from the battery vents. It also combines with surrounding particles. This combination accumulates over time and is the leading cause of corrosion on the battery terminals and cables.

Is It Safe To Extend Car Battery Cables?

Have you been wondering how to extend car battery cables or is it safe to extend car battery cables? Yes. It is important to determine the amount of cable that needs to be extended for a certain task. And then add an additional 8mm cable for every 10 feet of wire needed. If no wire gauge information is given, it’s best to use 12-gauge wire.
With this new extension from the battery’s positive terminal to a bolt-on metal surface within reach, it becomes possible to replace a discharged car battery with some emergency jumper cables. But before starting the project, ensure that both cars have their engines off while charging jumpers in one car so as not to let its engine start up while there are still wires dangling from another vehicle.

Why To Extend Car Battery Cables?

Many people like to extend their jumper cables for two reasons. One is as a safety measure, as it could prevent other drivers from having to go out and access the battery; the second is that longer jumper cables allow users more time to work on their car before needing to find a power source.

How To Fix Corroded Battery Terminals?

Unfortunately, corrosion will not go away on its own. Instead, it will require a good old-fashioned job. If the buildup is not too severe, it is possible to clean the terminals as follows:

Use a wire brush and battery cleaner to clean the contacts. This is the optimal procedure, as the battery cleaner breaks down the accumulated particles, and the wire brush removes them.

Make a paste of baking soda and water and apply it with a toothbrush. If you don’t mind scrubbing a little more, this procedure works just as well, and you can do this everyday household product.

How To Extend Car Battery Cables?

Below are some steps through which you can extend your car battery cables.

Step 1:-

Find the battery terminals on each end of your car.

Step 2:-

Locate an extension cable that is at least as long as the distance between your battery and the other terminal
Attach one end of the extension cable to one terminal.

Step 3:-

Then, attach the other end to the other terminal this will provide power from a different source.

Step 4:-

Test if it works by turning on headlights or running any electrical device in your car – you should see them turn on!

Step 5:-

If you can’t find a long enough extension cable, try using two shorter cables instead, such as attaching one wire to each side of a 9-volt battery and connecting these together with another wire to complete the circuit.

Step 6:-

Keep in mind that multiple pairs of cables must be used to keep voltage balanced for safety reasons
Put away the cable extensions when they are not needed.
Therefore, these are some steps as an answer to your question about how to extend car battery cables?


We hope the above-mentioned information will definitely answer your question about how to extend car battery cables? and will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll try to solve your doubts as soon as possible.

How To Fix A Service Power Steering Light On The Dashboard?

Usually, when warning lights appear on our vehicle’s dashboard, we tend to be concerned. Especially when it’s the power steering warning light. It would mean a total power steering failure, making the vehicle much harder to steer.

This article will discuss what this light means, the cause of this warning light, and how to fix it.

What Does Service Power Steering Mean?

The “Service power steering” warning tells you that your power steering system has faults and immediately prompts you to investigate a possible cause. The reason may differ due to the type of power steering system in your vehicle. If your vehicle uses a hydraulic power steering system, then a leak in the system would be the cause that would result in a low power steering fluid.

In this case, carry out a thorough inspection of your vehicle for any power steering fluid leak. And if there isn’t any sign of a leak, replenish the power steering fluid. And if it’s an electronic power steering (EPS) system, you would notice an illuminated EPS light instead. EPS systems do not use fluids to provide steering assistance.

Now, there are no fluid levels to check, and as such, you would suspect the batteries because If you recently removed and reconnected your vehicle’s battery or required a jump-start for your car, it would confirm this.

What Causes This Service Light to Come On The Dashboard?

Below are some causes of the service power steering light:

1. Low Power Steering Fluid:-

The power steering system relies mainly on having a specific fluid volume to work accurately. And if you take a look under the hood, you’ll notice a small tank where you can pour in the new power steering fluid, and you will notice that there is a minimum level and a maximum level, which are pretty close.

So when the fluid in the system isn’t enough, your pump won’t have a proper lubrication, and the fluid temperature will rise, which could cause your pump to wear out prematurely. All these combined will lead to an early failure of the power steering and will cause this warning to appear.

2. Broken Power Steering Belt:-

The power steering system is connected to a pump run by the crankshaft of your vehicle’s engine. A pulley on the engine turns a belt connected to the power steering pump and thus always supplies the pump with consistent power. Sometimes, the belts could wear and tear, crack, and eventually snap.

When this happens, you’ll know immediately as your power steering will completely give out, and your steering will immediately become extremely stiff and difficult to operate correctly because your power steering pump no longer receives power from your engine.

3. Contaminated Power Steering Fluid:-

Pressure is applied against a specific amount of liquid to operate the power steering pump. In order for power steering systems to function optimally, the fluid in the hydraulic tubes must be free of contaminants, air bubbles, and other liquid intrusions. Contamination regularly occurs due to deterioration or falling apart of tubes and hoses present in the power steering system.

Similarly, moisture could find its way into the fluid, enhancing friction, which eventually leads to the power steering pump and, consequently, the power steering becoming extraordinarily stiff and difficult to control, especially when the vehicle is in motion. This will cause the service power steering warning to appear.

4. Bad Power Steering Pump:-

The power steering pump is a proper mechanical component with many moving parts. Every mechanical component with moving parts will experience wear with time. Seals can wear out, internal components can become warped, and excessive friction could eventually break it down. And sooner or later, the pump would lose pressure, and your steering would become less easy to operate.

Moreover, if your pump were to give out completely, you’d lose every bit of fluid pressure in your system, resulting in the total failure of your power steering you’ll be required to change the pump.

5. Power Steering Fluid Leaks:-

Even the smallest leaks in your fluid lines can cause a loss of fluid pressure. power steering fluid leak doesn’t happen immediately, as most times, it begins with a seal slowly starting to wear out and fail or a hose developing slight flaws.

It might seem like these are small and insignificant problems. They slowly and surely appear as minor problems, which become bigger, eventually leading to a failure of the power steering.

Is It Safe To Drive With This Warning Light On?

It is not safe to drive with the service power steering warning on. Even if you could, it’s not going to be easy, as the steering would become heavy, and steering will be difficult. It will also be near impossible to react to events on the highway; therefore, driving with the service power steering light could lead to a fatal accident.

How Much Does It Cost To Service The Power Steering?

If it comes to repairing the power steering pump, the cost would be somewhere between $200 and $350. Replacing the power steering pump with a brand new one would cost around $400 to $800 depending on the vehicle model or repair shop you take it to.

What to Do When This Service The Power Steering Light Comes On?

It would be best if you did the necessary things whenever the service power steering light turns on while you’re on the road. Below are some of them:

Step 1:- Signal Other Drivers Using Your Hazard Lights

It would be best if you signaled other drivers on the road that there’s a problem with your vehicle. You could do this action by turning on your vehicle’s hazard lights. And by doing this, you’re also allowing them to practice caution when passing or tailing your car.

Step 2:- Carefully Direct Your Vehicle To The Shoulder Of The Road

Examine the road properly for incoming cars and carefully turn your steering wheel to direct your car towards the shoulder of the road. This action would require you to apply extra force while moving slowly, depending on the damage suffered by your power steering system. Also, don’t be in haste to switch lanes. Always keep in mind that you might not be able to counter-steer immediately in emergencies.

Step 3:- Slow Down Until You Reach A Complete Stop

While you pull over to the shoulder of the road, don’t forget to step lightly on the brake pedals, making sure that there aren’t any fast-approaching vehicles before reducing your speed. Also, once you’ve reached the shoulder lane, gradually apply the brakes until you reach a complete stop.

Step 4:- Assess The Severity Of The Issue

After parking your vehicle in a secure spot, carefully proceed to assess the severity of the issue. You could carry out this action by turning the steering left and right to ascertain the severity of the problem.

Depending on the assessment outcome, you could continue driving until you get home or to a mechanic or even have the vehicle towed. Also, make sure to drive slowly and stay on the shoulder of the road to minimize steering inputs. Be highly aware of your surroundings and apply defensive driving at all times.

Step 5:- Call For A Tow Truck

Call for a tow truck if you cannot steer the vehicle properly or are under the impression that you shouldn’t drive your car in such conditions. Make sure that you park your vehicle at a safe position on the shoulder lane, as it could take some time before the tow truck arrives.

Frequently Asked Questions:-

1. What Causes Power Steering to Go Out?

In some cases, too much fluid could cause the valves and seals to collapse because of excess pressure. Or not enough fluid, and the pump can’t exert enough force required to turn your vehicle. Inputting the right amount of fluid would help prevent this issue, but if there be any leaks, the loss of fluid will eventually lead to failure of the power steering.

2. What Causes Electric Power Steering Failure?

The electronic power steering systems fail due to the problems associated with the mounted electric motors. The most likely cause of failure is excessive heat on the motor. And also, an Infiltration of the system environment by dust, water, dirt, or other contaminants will eventually lead to a failure of the EPS.


We hope the above-mentioned information about the service power steering warning light will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll try to solve your doubts as soon as possible.

Why My Subaru Crosstrek Won’t Start Dash Lights Flashing, What To Do?

Cars turn out into a liability after a specific period of time. It can be quite frustrating when it comes to dealing with those car problems and their repairs. However, it can get even more frustrating when you don’t know the reason behind what is wrong with your vehicle. What if your subaru crosstrek won’t start dash lights flashing? It can be quite frustrating. 

Causes Of Subaru Crosstrek Won’t Start Dash Lights Flashing?

The most common causes for flickering dashboard lights and no engine crank in Subaru Crosstrek are weak battery, corrosion on battery terminals, and bad ground connection.

1. Weak Battery:-

The leading cause of flickering dashboard lights and no start in Subaru Crosstrek is a weak battery. You may also hear a rapid clicking noise when you try to start the engine. If there isn’t enough charge in the battery to power the starter motor, and you try to crank the engine, the battery voltage will get so low that it can’t properly power the lights, accessories, and of course the starter.

2. Poor Battery Connection:-

It is possible the battery in your Subaru Crosstrek is in good health, but the current flow is interrupted due to a loose electrical connection, damaged wire, or corrosion on the battery terminals.

3. Bad Ground Connection:-

If the ground connection of the chassis or the engine goes bad in your Crosstrek due to rust or corrosion, you will face all sorts of electrical issues, including clicking noises, and subaru crosstrek won’t start dash lights flashing. The starter motor and its solenoid rely on the ground connection of the engine to function properly. When the ground is bad, the starter solenoid may still work and make clicking noises as it has a low current requirement, but the starter motor may not turn over the engine due to the high current requirement.

How To Fix The Subaru Crosstrek Won’t Start And Dash Lights Flashing Problem?

Step 1:- Test The Battery In Crosstrek

The easiest method to check the 12v battery in Crosstrek is by measuring the voltage with a multimeter. A healthy battery should have 12.6 volts or more when fully charged. But keep in mind, that a volt meter will only give you a rough idea of the condition of the battery. Sometimes a battery showing over 12.4 volts may not be able to supply enough current to crank the engine.

Step 2:- Voltage Drop Test

You can also check the voltage drop at the battery when you try to start the engine. If the voltage drops too much, below 10 volts, your battery doesn’t have enough charge to start the engine. This can happen due to internal degradation of the battery, if the vehicle has been sitting for a long time, or if the alternator in your Crosstrek has malfunctioned and not charged the battery properly.

Step 3:- Jump Start Crosstrek

To rule out dead battery, your best course of action is to jump-start your Crosstrek using jumper cables and a healthy battery from another vehicle, or using a battery booster if available. The engine of both the vehicles should be off, and the transmission in Park.

  1. Connect the red cable to the positive terminal of the dead battery in Crosstrek and the other end of the red cable to the positive terminal of the donor battery.
  2. Connect the black cable to the negative terminal of the donor battery.
  3. Finally, connect the other end of the black cable to any bare unpainted metal part of the body or engine of your Crosstrek.
  4. Start your Crosstrek.
  5. Remove the cables in the reverse order.

Step 4:- Check Battery Terminals

To know if your Crosstrek starting problems are from dirty battery terminals, you need to investigate them. Lift the plastic covers over the terminals and check for any signs of corrosion. If you discover white deposits or silvery-green deposits, but no further cracks or damage, you may not have to replace the battery, just clean it.

Step 5:- Clean The Battery Terminals

There is a neat little trick with which you can clean corrosion on the battery terminals of your Crosstrek in under a minute. Pour hot boiling water over the corroded terminals and the corrosion will just melt away. Do one terminal at a time and don’t let water puddle on the top of the battery touch both terminals at the same time, this can short the battery.

Step 6:- Inspect The Ground Connections

You can check the quality of the ground connection in Crosstrek. By doing a conductivity test between the negative terminal of the battery and the chassis/body of the vehicle and the engine. Take a multimeter, and change its settings to the ohms symbol. Touch one probe to the negative terminal of the battery, and the other probe to any exposed metal (unpainted) part of the chassis/body. The reading should be at or very close to zero ohms. Do the same between the negative terminal of the battery and any exposed metal part of the engine.

If the conductivity test fails, check the condition of the ground connections in your Crosstrek. Inspect the connectors of the ground cables (battery to the body, body to the engine) for any signs of rust or corrosion. Clean the contacts with sandpaper.

Therefore, these are some steps through which you can fix the issue of subaru crosstrek won’t start dash lights flashing.


We hope the above-mentioned information about the issue of subaru crosstrek won’t start dash lights flashing will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll try to solve your doubts as soon as possible.

Car Won’t Accelerate But RPMs Go Up?

If your car won’t accelerate but rpms go up, it is often a result of a faulty transmission or clogged air filters and not a problem with an engine. If you experience this issue, employ the services of an auto mechanic to diagnose and fix the issue properly. In this article, we’ll be discussing this problem in detail.

Reasons Why Your Car Won’t Accelerate But RPMs Go Up?

This problem can be caused by a faulty transmission or clogged air filters. Here are some basic reasons behind the cause of this issue.

1. Low Transmission Fluid (Automatic Transmission)

A low transmission fluid level is one of the reasons why your car won’t accelerate but rpm goes up. The job of the transmission fluid is to aid in transferring power to the wheels. The power will only get to the torque converter and not the engine when the transmission fluid is low. Quickly check the transmission fluid.

2. Bad Torque Converter

The torque converter converts the mechanical power of an engine into hydraulic power. When the torque converter gets bad, it can no longer do its job, and power can not get to the transmission.

3. Drive Train No Longer Connected To Wheels

A broken axle shaft will stop the transmission from turning the wheels of your car. This will cause your car not to accelerate but the rpm goes up. You won’t feel even the slightest car jerk as you put it into gear.

4. Worn Clutch Disc (Manual Transmission)

The manual transmission is no longer popular, especially in modern cars, although a faulty clutch can cause your not to accelerate if your vehicle has it. The clutch links the transmission (through the input shaft) and the engine (through the flywheel).

When the clutch becomes unable to hold anymore, it begins to slip off, this is like losing its grip on the flywheel, and it feels like you have pushed the clutch in. This is a common occurrence at high speed under great acceleration. It will worsen as the clutch disk slips, burns out, and can only handle lesser torque.

5. Mass Air Flow Sensor Failure

The primary purpose of an airflow sensor can be derived from the name, and it is used to measure the amount of air that enters through the air intake. The mass airflow sensor is attached to the air intake cleaner in most vehicles. A clogged or failing mass flow sensor can send the wrong signal to the engine ECU since there isn’t enough air in the engine. This can be the reason why your car won’t accelerate but rpms go up.

6. Malfunctioning TPS

TPS means a Throttle position sensor, and its main job is to detect how much angle the throttle valve is opened. In a nutshell, it is used for detecting how much pressure you have induced on your accelerator. When there’s a problem with your TPS, it won’t be able to get information, your ECU won’t be able to read throttle position, and your vehicle will lose power.

7. Clogged Fuel Filter

The clogged air filter can be another reason for this problem. Typically, a fuel filter will prevent anything other than fuel to pass through and go into the engine. If it traps a lot of tiny particles (dirt, gunk, or sediment), eventually the engine won’t be able to receive any power, and this will cause your car not to accelerate. Therefore ensure your fuel filter is clean and free from dirt or gunk.

 8. Incorrect Air/Fuel Ratio

After examining your car and discovering that the problem is not because of the transmission, or if you have fixed the transmission, but the problem persists, the inability to accelerate may be due to a faulty intake system or fuel injection system.

In order for combustion to occur properly, the engine cylinder must have the right mixture of air and fuel. If the mass airflow sensor and air filter are not working, the engine will not receive adequate air to operate correctly. Also, if your fuel pump or fuel injector is not functioning very well, the engine won’t get enough gas. Your vehicle won’t accelerate if it has this problem in most cases.

9. Bad Throttle Body

Modern cars now use a computer to control the amount of fuel added to the engine, based on how much fuel is sent to the cylinders. In simple terms, one can say how much you press the gas pedal determines the amount of fuel added to the engine. The gas pedal controls the throttle body, determining the air that goes into the engine.

To open more throttle valves, you must add more pressure on the gas pedal; this will add more oxygen to the engine and more fuel to complement the air. Therefore if your car’s throttle body is faulty or dirty with carbon sediments, you might find it challenging to get enough air to the engine, causing your car won’t accelerate but rpms go up.

10. Malfunctioning Engine Control Model

Have you exhausted all the options above? You may need an expert technician to check your engine control unit (ECU). Since computers control modern cars, sometimes they can malfunction due to improper use, or they may need an upgrade or reset. A good technician will know what best to do to fix this.

What To Do If Your Car Won’t Accelerate But RPM Goes Up?

It is worthy to note that transmission can be tricky because they are enormous in handling are found under the car. Some of its internal components can be tricky to handle or repair; they are not easy as cleaning your car plug or something related; they are way complicated.

So we recommend you to get an expert who has a good understanding of transmissions to examine, detect the actual problem, and carefully fix it.


1. Why Do My Rpms Go Up, but the Car Doesn’t Accelerate?

If your car won’t accelerate but rpm goes up, it is often a result of a faulty transmission or clogged air filters and not a problem with an engine. If you experience this issue, employ the services of an auto mechanic to diagnose and fix the issue properly.

2. Why Is My RPM High When Accelerating?

Transmission fluid acts as a coolant and helps in sending power to the transmission through the engine. As the transmission leaks, the fluid level falls, causing the gearbox band or torque converter to slip, causing the vehicle to rotate at a high level.

3. When I Press The Gas Pedal, It Won’t Accelerate?

When your car fuel filter becomes dirty or clogged, it will sometimes prevent fuel flow into the engine; this can also be associated with the fuel pump. A faulty fuel pump will not supply fuel to the injector. A leaking fuel line can also be why your car is not accelerating.

4. What Does Transmission Slipping Feel Like?

When you start to feel like your car is slow to respond, significantly when you change the gear, it’s a transmission slipping problem. The problem may also manifest as noises or a pitching change.

5. Can Transmission Cause a Car Not to Accelerate?

Yes, it can. Also, when an automotive transmission torque converter is faulty, it can cause poor acceleration. The most common transmission-related issues resulting in loss or poor acceleration are Internal automatic transmission failure.


If your car won’t accelerate but rpms go up, it is often a result of a faulty transmission or clogged air filters and not a problem with an engine. If you experience this issue, employ the services of an auto mechanic to diagnose and fix the issue properly.