When Does Nissan Frontier Slip Light Comes On?

Your vehicle comes equipped with advanced safety systems that enable a more controlled and enjoyable ride. One such system is the vehicle dynamic control (VDC). It is designed to improve traction and distribute torque to wheels when it is needed the most. If there is a problem with traction in your nissar frontier, you might see the nissan frontier slip light on the dashboard.

In this article, we’ll be discussing this problem in detail. Let’s get started.

What Does The Nissan Frontier Slip Light Mean?

The slip light illuminates on your nissar frontier car’s dashboard when there is a problem with the traction control system. Slip control is designed to regain traction when driving across a slippery surface.

When this light comes on, you know that the system is working as intended. In normal operations, the slip light might come on for a second until traction is regained. Then, it will go off again. However, when the slip light comes on and stays on, it could indicate a bigger problem.

What Are The Causes Of The Slip Light To Come On?

The most common cause of a nissan frontier slip light to come on the dashboard is a faulty wheel sensors or defective ABS rings. It can also be caused by a bad ABS control module or faulty wirings.

Here is a more detailed list of the most common reasons of the slip light:

1. Faulty Wheel Sensors:-

Wheel sensors are also known as ABS sensors. The job of the wheel sensor is to send data back to the PCM. There is one located on each wheel. When one wheel is traveling at a different speed than the other wheels, the sensor alerts the PCM that traction is lost. However, when a wheel sensor is bad, it could send back faulty data causing the traction control system to malfunction. If this happens, you might see the slip light on the dashboard and the ABS warning light as well.

Abs Sensor Close

2. Defective ABS Rings:-

With each wheel, there are also ABS rings attached. The reason that the wheel sensor can determine the speed of the wheel is because of the ABS ring. In fact, the sensors rely on the rings to measure the speed. When an ABS ring breaks, the wheel sensor will receive the wrong speed. With that information, a defective reading gets sent back to the PCM, which can cause the traction system to be thrown out of whack. Again, you might see the slip light on the dashboard combined with the ABS light too.

Broken Abs Ring

3. Bad ABS Control Unit

Running the entire system is the ABS control unit. It’s considered the brain of the entire operation. This vital part monitors the ABS sensors and responds by controlling the brake pressure with the help of the ABS modulator. When the ABS control unit becomes faulty, you will see the ABS light and the slip light. With a diagnostic scanner, you will be able to see where the fault is for a quick repair.

4. Faulty Wires

The ABS system contains numerous wires, all of which need to be in optimal condition to send signals back and forth. If there is a broken or defective wire between the wheel sensors and ABS control unit, you will see warning lights. Sometimes, a wire just becomes loose and can be reconnected easily. However, finding the defective wire can prove to be a challenge that requires some extra time.

Therefore, these are some common causes behind the nissan frontier slip light to illuminate on the dashboard.

Can I Drive With The Slip Indicator Light On The Vehicle?

No. It is unsafe to drive the vehicle when the slip indicator light is on as it can be very dangerous. The slip indicator light is on when the traction control is malfunctioning. The vehicle is safe to drive to a local shop or to the dealership as and when you face this issue.

What Is The Repairing Cost Of The Slip Light?

The average wheel sensor replacement cost is between $200 and $250. An average ABS control module replacement can cost between $320 and $1,000. However, it isn’t the labor costs that drive up the price. In fact, the part itself can be expensive.

How To Fix The Issue Of The Slip Light?

To turn off the nissan frontier slip light, you need to figure out where the fault is. If the light comes on and turns back off, you are probably just driving on a slippery road and the system is running as it should. However, if it doesn’t turn off, even when you have regained traction, there could be a problem that needs to be repaired.

If the slip light is on because of a bad wheel sensor, it will need to be replaced. In some cases, you could clean the sensor and reinstall it, which would save you a few bucks.

If the sensor isn’t the issue, you might take a second look at all of the wiring to ensure that the connections and integrity are intact. If the wiring looks worn, it’s best to replace it.

The easiest way to locate an issue with the traction control is to check the trouble codes with a compatible OBD2 scanner.


We hope the above-mentioned information about the nissan frontier slip light will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll definitely try to solve your doubts as soon as possible.

Leave a Comment