If you are wondering how to disable abs light on silverado, you have come to the right place. Here, we will show you how to disable ABS light in less than 5 steps. Let’s get started.
Table of Contents
Chevy Silverado ABS Light On Causes?
Here, look at the causes and why it’s important to know how to disable abs light on silverado.
1. Wheel Speed Sensors Are Broken:-
The purpose of the wheel speed sensor is to tell your car how fast the wheels are turning. When the speed gets unusually high, it sends a signal to the system. Once the system receives the signal, it alarms you with an ABS light. However, if the wheel speed sensor is broken or dirty, it will show faulty results. This is because the sensor will send signals of fast speed even when the wheel is turning at an average pace.
Due to a faulty wheel sensor, you may not know when your car is moving too fast. This can very likely lead to accidents. When you see your wheel sensor is giving wrong signals, you need to disable ABS lights and fix the issue.
2. Hydraulic Circuits Are Damaged:-
Hydraulic circuits enable a car to stop. However, damaged hydraulic circuits fail to do so. When this happens, your car’s ABS realizes that your vehicle is in a vulnerable state. Once it gets the signal, your Silverado’s ABS will show you signs.
The Silverado’s ABS light can mean that your car’s hydraulic circuits are damaged. Therefore, you need to disable it first to fix the issue properly.
3. Malfunctioning ABS System:-
Your Silverado’s ABS is connected with other systems of your vehicle as well. The ABS receives the signal from sensors connected with different parts of the car. The ABS light goes on if one or more of these parts sends irregular signals.
This type of malfunctioning can prevent the generation of a signal when it is needed. If you want to solve this issue, you need to disable the ABS light and fix the ABS overall.
4. ABS Module:-
The antilock brake system runs through the ABS module. This module physically controls the anti-lock brake system If it becomes damaged, and can no longer control all four brakes, the ABS light will activate. Typically, corrosion is the most common reason why the module fails.
5. ABS Fluid Level:-
If the fluid level is too low to keep pressure in the ABS lines, the ABS light will come on. Without the pressure, the ABS will no longer be able to physically activate.
Therefore, these are some basic causes that trigger the ABS light to come on.
Is It Safe To Drive Your Silverado?
The ABS light is different than the brake warning light itself. The brake light indicates that there is a problem with the physical braking system and that your Silverado is unsafe to drive.
Yes, you can drive your Silverado with the ABS light on. Is it safe? It’s not as safe, especially when it’s raining, snowing, or the road surface is loose/uneven. That’s why we recommend having the ABS fixed as soon as possible.
How To Disable ABS Light On Silverado?
If you have ABS light on your Silverado, it can mean a lot of things. However, if you need to disable the ABS light on your Silverado, then keep on reading. Here are the easiest method of disabling ABS light on Silverado with 3 simple methods.
Step 1: Manage Power Supply:-
To get into the disabling process, you will have to cut off and manage the power supply first. Here’s how to do it:
1. Detach the positive cable from the car battery.
2. Hold down the brake pedal and wait till the vehicle’s electrical system drains properly.
3. Check if this has reset the car’s central computer.
4. Now plug the cable back in.
5. If this doesn’t reset your car’s system and reset the light, then repeat the whole process.
Step 2: Working With The Sensors:-
Now you will have to change the ABS sensors. Here’s what you need to do:
1. Unscrew the housing of the sensor located on the wheel hub.
2. Unplug all the wirings.
3. Place and screw a new sensor.
4. Reset the whole system of your Silverado.
Step 3: Using OBD Code Reader:-
Your final resort now is to use an OBD code reader. OBD code reader is a device that identifies and displays the different issues with cars through codes.
To do that, you will have to connect the OBD device to your car. Here’s how to do it:
1. Locate the DLC or the diagnostic link connector under the dash near the steering column. If you are having difficulty locating the port, then take the help of your car’s manual.
2. Open the lid hiding the DLC system and insert the code reader’s connector.
3. Now power on the OBD code reader and see the codes displayed on the screen.
You can find the problem with your car with the codes. Here code chart that can help you determine the issue. Once you have identified the problem, just fix it, and your ABS light will be off. Here’s the simplest method of how to disable abs light on silverado.
FAQs:-
1. What happens if I remove the ABS fuse?
If you remove the ABS fuse, the car will not have any problem operating normally. However, the ABS will be off and will not turn on till you put the fuse back in.
In the worst-case scenario, removing the ABS fuse can lock the wheels as well. So be aware of that.
2. Can ABS be turned off?
In most cars, including Silverado, the ABS cannot be turned off using the car’s operating system. However, you can do this manually with every model available.
3. Can I drive without an ABS fuse?
Yes, you can drive without an ABS fuse. But this possesses the chance of brake failure and even locked wheels.
4. Does a blown fuse cause ABS light to come on?
A blown fuse can be a reason why the ABS light comes on. When a fuse blows, the car’s system considers this a signal that the engine or the brake system is damaged. As a result, the ABS light comes on.
Conclusion:-
We hope the above mentioned information about how to disable abs light on silverado will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll try to solve your doubts as soon as possible.