Sounds

Why There Is A Clunking Noise In First Gear?

If your transmission mount or engine mount becomes loose or breaks then the clunking noise in first gear occurs. You may also hear such kind of clunking noises whenever you make a sudden change in the speed or whenever you shift gears, due to the movement of the insecure mount. Let’s get an in-depth format for the cause.

Reason Behind The Clunking Noise In First Gear?

Your transmission is responsible for making your car move it transfers the power from the engine to the wheels. During normal operations, you’ll definitely hear at least some noise. However, when it begins making unusual sounds, particularly a clunking or whining noise when in gear, it’s a sign that there is something wrong.

Common causes for this issue are as follows:-

It’s always a little unnerving when your vehicle starts making a noise you’ve never heard before. It can be especially disturbing when you feel the clunking noise in first gear and it’s making reverberating through the whole car. If this is the case, you should ask a mechanic to take a look.

1. Motor Mounts and Transmission Mounts:-

The Motor and transmission mounts provide a cushioned point-of-contact between the both of them and your vehicle’s frame. As the vehicle ages, these cushions can shrink and can become brittle, split or may even fall out-of-place. All of these conditions will lead to clunking noise.

2. Upper and Lower Ball Joints:-

The ball joints on your vehicle provide the pivot point for steering your wheels. Often the only time you will hear them is when turning the steering wheel while you are completely stopped. Ball joints are vitally important for maintaining the control of your car. You’ll often notice a bit of shaking in the front of your car along with the clunking noise in first gear.

3. Exhaust Hangers:-

These are devices that hold your exhaust up under your vehicle. Unless they are very worn, you’ll often only hear them when you first start your vehicle. The sound usually goes away once the exhaust system warms up. In some cases, they will also rattle as you go over bumps in the road.

4. CV Joints or U-Joints:-

Worn CV or U-joints are not, in themselves, inherently dangerous when they fail. In most instances, their failure can simply leave you stranded in a parking space, or worse, on the side of the road. If you suspect CV or U-joints are the cause of the noises you’re hearing, it’s best to have them looked at by a professional right away.

5. Tie Rod Ends:-

The Tie rods are important in keeping your car under control, and any noise that is associated with them should be inspected immediately. Depending on the age and type of vehicle that you own, there can be either a rack-and-pinion steering, a re-circulating ball, or, in older vehicles, a mechanical steering box.

Hence, these are some common causes that lead to clunking noise.

How To Fix The Issue Of Clunking Noise In The First Gear?

1. If there is low transmission fluid, it’s advised to check for the transmission fluid leaks. As low transmission fluid can cause clunking noise in first gear.

2. You need to inspect the tie rod ends as it is important in keeping your car under control, and any noise that is associated with them should be inspected immediately to avoid a dangerous situation from developing.

3. If you suspect CV or U-joints are the cause of the clunking noise in the first gear you’re hearing, it’s best to have them looked at by a professional right away.

4. If you suspect the exhaust hangers are the cause of the noise, get them checked and tightened as soon as possible. This will help to avoid additional damage and keep your exhaust pipe from coming loose and dragging the ground.

5. The Worn out ball joints are a real safety issue. If you believe this is the cause of your vehicle’s noise, have them checked out and replaced immediately.

6. If your motor or transmission mounts are failing, you’ll often feel the vibration from your drive-train inside the vehicle. If this situation is caught and corrected soon enough, you can mitigate damage to your vehicle and avoid costly repairs.

Hence, when you start hearing odd noises coming from your vehicle it is always safer and less costly to get them checked out sooner rather than later.

Conclusion:-

We hope the above-mentioned information about why there is a clunking noise in first gear will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll definitely try to solve your doubts as soon as possible.

There Is A Loud Muffler Sound Coming From Engine, How To Fix?

If you’ve noticed a loud muffler sound coming from engine by the day, you’re probably wondering what is causing the problem. Engine sounds are always a little scary, and if you’re not a mechanic these sounds are likely a bit overwhelming. There are different types of sounds that can come from your engine, and the type of sound you’re hearing can indicate different problems.

Why There Is A Loud Muffler Sound Coming From Engine?

Is your car suddenly making a loud muffled sound that’s coming from the engine? If you answered yes, then your car has most likely developed an exhaust leak.

A loud muffler sound coming from the engine usually means that your car has an exhaust leak at the flex pipe or at the exhaust manifold. Don’t worry exhaust leaks are common and will not damage your engine if caught quickly.

Here are all of the exhaust leak symptoms:-

1. The loud muffler sound coming from the engine or somewhere in the front of the car. It might even seem like someone moved your muffler to the front of the car or did a muffler delete. The sound gets louder while accelerating.

2. Loss of power:- The car feels a little more sluggish when accelerating.

3. Reduced fuel economy:- If your MPG (Miles-Per-Galon) has increased, then an exhaust leak might be to blame.

What Are The Various Causes Of A Loud Muffler Sound From The Engine?

In order to answer your question, “Why is my car engine so loud?” here are 5 common reasons.

1. Faulty Muffler:-

The first thing you should look for is a muffler problem. A worn-out or damaged muffler will definitely make your car run louder. Besides the noise volume, other potential side effects of muffler trouble could be poorer gas mileage and increased fumes.

2. Leaking Exhaust:-

When your engine starts to sputter or rumble, a leaky exhaust manifold could be the culprit, especially if you notice that the “Check Engine” signal has lit up. Exhaust leaks are very dangerous, due to both their extreme heat and the hazardous carbon monoxide gas they contain. A leaking exhaust can also play havoc with your engine’s control systems, causing a loss of power, mileage, or both.

3. Worn Engine Bearings:-

When the engine bearings are starting to wear out, they will let you know it, loud and clear, in the form of a constant knocking sound under your hood. This is a fairly urgent problem because if the engine bearings give out completely, the engine is likely to seize up.

4. Engine Needs Oil:-

A noise that sounds like rubbing or grinding will often signal that your engine is low on oil. If you own a newer model car, you may have been relying on the engine oil level monitor to warn you. However, the sensor might have stopped working correctly.

5. Old Torque Converter:-

A failing torque converter will make a noticeable grinding sound when your vehicle is in gear. The issue may result from insufficient transmission fluid or from wear and damage to the needle bearings.

Therefore, some of these reasons might be also responsible for the cause of a loud muffler sound coming from engine.

How Much Does It Cost To Fix An Exhaust Leak?

If it’s just the gasket that’s blown and causing the leak, then you’re looking at around $20 for the gasket and approximately 1 to 3 hours of labor, which would roughly amount to $110 to $330 at an independent shop, depending on how difficult it is to replace.

Exhaust manifolds can cost from $80 at junkyards all the way to $300 for a brand new one. Combine that with new gaskets and bolts, and you might be looking at $140-370 in parts alone. Labor time is different for every model, but will usually take 2-3 hours and cost around $220 to $320.

For parts, a new gasket and new bolts are needed, which would roughly cost $70 total. The labor can be anywhere from 2 hours to 5 or even 8 if things go really south. It really depends on the vehicle model and how competent the mechanic is. You can expect to pay $250 all the way to $800 or more for labor.

Flex pipes cost around $30 to $50 and usually take around one hour to replace, which would cost $90 to $110 in labor.

How To Diagnose A Loud Muffler Sound Coming From The Engine?

Exhaust leaks can appear anywhere in the exhaust system, but the most likely spots for loud muffler-like exhaust leaks under the hood are exhaust manifold gaskets, the exhaust manifold itself, and the flex pipe.

Step 1:-

You need to check the exhaust manifold for leaks. The exhaust manifold can leak in three areas the mounting surface gasket, the downpipe/catalytic converter gasket, or the manifold itself.

Step 2:-

However, if the leak is big enough, a leaky exhaust manifold could produce a rumbly muffler sound instead of a loud ticking noise. Make sure that the engine is cold or don’t touch the exhaust manifold without gloves. The exhaust manifold will likely be covered by a heatshield, so go ahead and remove it to get a clear look at the manifold.

Step 3:-

Once the heatshield is off, try to tighten the exhaust manifold bolts just a bit to see if they are loose. Don’t break them off! If they are loose, tighten them back to factory specs and that should take care of the leak and the sound.

Step 4:-

After you’ve done that, give the exhaust manifold a visual inspection. Look for cracks and/or black sooty spots.

Step 5:-

Lastly, check both exhaust manifold gaskets. You can usually tell if they’re leaking by the black soot that has accumulated around them. Pay especially close attention to the gasket that’s between the manifold and the downpipe or catalytic converter if it’s connected directly to the manifold on your car. Ninety-nine times out of hundred, the gasket between the downpipe or catalytic converter and the exhaust manifold will be the reason for the loud muffler sound.

Step 6:-

You need to check the flex pipe for leaks. The flex pipe is really easy to identify as it has a woven metal fabric shell around it, and underneath it looks like a round accordion. You can easily tell that they’re leaking by the black soot that accumulates on their woven shell. Most of the time, you can even feel an exhaust leak through the flex pipe with your hand while the engine is running.

Therefore, if you’ve followed all the diagnosing steps you’ll easily unmask the real reasons behind the cause of a loud muffler sound coming from engine. 

What To Do If There Is A Loud Muffler Sound Coming From The Engine?

If you do hear a loud noise and you suspect it is the exhaust system, be sure to keep fresh air coming into the vehicle and don’t sit in the car while it’s idling.

Fortunately, you can change parts of your exhaust system without having to replace your entire muffler or exhaust system. The smart option is to have your mechanic check your exhaust system as part of routine auto maintenance. This can save you hundreds of dollars. If you detect unusual noises and odors, or a change in gas mileage, always have a specialist look it over.

How To Fix An Exhaust Manifold Gasket Leak?

The following are some steps through which you can resolve the issue of a loud muffler-like sound from engine easily.

Step 1:-

You need to remove the bolts connecting the exhaust pipe and the cat pipe. Also, remove the left front tire and splash guard.

Step 2:-

Disconnect the sensor wiring connectors. and remove the top bolts that connect the cat to the exhaust header.

Step 3:-

Lift the cat out of the bottom bracket and align it in such a way that you remove the bottom bolts that hold the cat bracket.

Step 4:-

Remove bottom bolts and bracket, and a metal gasket will come out with it. And with the bracket removed along with the gasket, you can see/feel the exhaust leak.

Step 5:-

Clean up the exhaust manifold, replace the gasket if it is cracked or if it doesn’t need replacing, and seal it up. Button and torque everything back up.

Step 6:-

Turn the vac back on and check for bubbles. If there are no bubbles, check if there is a crack in the manifold that can be fixed by welding it.

Therefore, if you are looking for some inexpensive ways to fix the exhaust leaks without welding, then you can use the following ways:

1. One way of fixing the leaks without welding is to use exhaust putties, a clay-like thing that you have to push into the crack or the leak, and as it hardens, it feels like steel.

2. Another thing you can try using is a muffler bandage. It is similar to an ace bandage. You have to wrap it around the muffler, and as it seals, it becomes hard.

3. Last but not least, you can also use an exhaust band clamp. You will have to get it over the damaged area, and as you tighten it down, it will seal the crack or leak.

Therefore, these are some steps for the issue of a loud muffler-like sound.

Conclusion:-

We hope the above-mentioned information about a loud muffler sound coming from engine will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll try to solve your doubts as soon as possible.

Why My Car Sounds Like A Lawnmower When Idling?

If you’re wondering what makes your car sounds like a lawnmower when idling. It may be because of an exhaust system leak although it is also possible that a failed wheel bearing could cause enough “rumbling” to sound loud.

In this article, we are going to discuss in detail the topic.

Should You Leave Your Car’s Engine Idling?

Idling is when a driver leaves the engine running and the vehicle parked. Every day in the U.S. millions of cars and trucks idle needlessly, sometimes for hours. An idling car can release as much pollution as a moving car. You may not be able to avoid keeping your engine running when you’re stopped at a traffic signal or stuck in slow-moving traffic. But other times idling is unnecessary.

Contrary to popular belief, restarting your car does not burn more fuel than leaving it idling. In fact, idling for just 10 seconds wastes more gas than restarting the engine. Warm up your engine by driving it, not by idling. Today’s electronic engines do not need to warm up, even in winter.

Reasons Behind Car Sounds Like A Lawnmower When Idling?

The exhaust system is located on the underside of your vehicle. It is responsible for processing your vehicle’s emissions by reducing the number of pollutants which is released. It also minimizes the engine exhaust noise and force. Engines produce dangerous gases as a byproduct of the combustion process. Which is considered very dangerous for human beings. This is why your vehicle must have a properly functioning exhaust system.

If a car sounds like a lawnmower when idling it is most likely due to an exhaust system leak. Exhaust noise, such as a “lawnmower” type sound should never be ignored because it may indicate an exhaust system leak which can release carbon monoxide into the cabin of your vehicle and negatively impact your health and well-being.

Following might can also be the reasons for the causing of this problem:-

1. Faulty Spark Plugs:-

If your car shakes, bounces, or makes odd noises like squealing, ticking, or like a lawnmower when it’s idling, there could well be a spark plug issue that needs your attention. Spark plugs are responsible for igniting the combined mixture of fuel and air within your vehicle’s combustion chamber. If one of yours is damaged or isn’t installed correctly, your car may be burning through fuel at a spotty, sporadic rate.

2. Leaky Vacuum Hose:-

All vehicles rely on a vacuum system to pull fuel into their engines. The great majority of them do this via an entire network of hoses and tubes. However, some newer vehicles have a throttle system that keeps the airflow through the system regular and regulates engine function.

Even the best vacuum hoses will accumulate wear and tear, eventually requiring replacement. Old hoses develop leaks, allowing too much air to mix with your fuel. One sign that this could be happening is during a rough idle, especially at a higher RPM. Another is an engine that misfires which causes loud noises.

3. Dirty Fuel Injector:-

Cars equipped with fuel injectors aren’t necessarily immune to a noisy or rough idle. Fuel injectors can accumulate dirt and grime over time, just like carburetors can. If your car sounds loud when idling, has been getting poor gas mileage, or both, a dirty carburetor may be the issue. As with carburetors, fuel injector cleaners can help you keep your system clean, efficient, and fully functional.

4. Carburetor Issues:-

If you drive an older vehicle, the chances are pretty good that it relies on a carburetor instead of a modern fuel injector. If you’ve been hearing odd car sounds under the hood or dealing with a rough idle, a carburetor issue is possible. If your system is also producing black smoke, you can be almost certain your carburetor is the culprit.

Signs Of Your Carburetor Is Failing:-

1. Engine Performance Reduction

2. Black Exhaust Smoke

3. Engine Backfires or Overheats.

What Sound Does A Lawnmower make?

Lawnmowers and sound go together like bread and butter; its the reason for which it was specially recommended for wearing the hearing protection at all times. Supposed if you’re idling your car in the traffic and the first of all, one of the most common sounds that you will hear like a lawnmower from your car is a squealing sound. The lawnmower sound makes a squealing sound and it can be unbearable at many a time.

How To Deal With The Issue Of Lawnmower Sound While Idling?

An improperly functioning exhaust system can affect both your vehicle’s performance and your ability to drive, which is why it is important to have your exhaust system maintained at regular intervals.

Step 1:-

Proper maintenance service should address all the components of the exhaust system including the exhaust manifold, front pipe, downpipe, catalytic converter, and muffler.

Step 2:-

There is a need to repair the exhaust system leak which includes sharp odors or a feeling of drowsiness while driving which may indicate a leak of noxious fumes into the cabin of the vehicle, sounds such as rattling, or a loud “lawnmower” type noise when accelerating due to holes or cracks in the exhaust system caused by rust or corrosion which can lead to an exhaust leak.

Step 3:-

Exhaust leaks are often a result of corrosion which is why it is imperative to have a trained automotive professional routinely inspect all components of your exhaust to determine the source of the leak and repair the damage.

Step 4:-

There is a need to replace the entire exhaust system in the future in order to ensure your safety.

Hence, to safeguard your vehicle from all these types of problems in the future you need to take the help of the professionals who will help to diagnose this problem of car sounds like a lawnmower when idling very well.

Conclusion:-

We hope the above-mentioned information will be helpful to all the viewers in dealing with this problem of car sounds like a lawnmower when idling. If anyone’s doubts persist feel free to comment in the comment section below we’ll definitely try to solve all the problems as soon as possible.

Why Does Brakes Squeak When Stopping Slow?

Brakes are a vital aspect of your car and without them, you could get into significant difficulties. So if you have squeaking brakes, it can be very worrying. The brakes squeak when stopping slow because of a high-frequency vibration of the brake pads against the rotating disc.

While it is normal for your brakes to make a small amount of noise especially when they aren’t warm, excessive and continuous squeaking of your brake pads could be a greater cause for concern.

Reasons Behind Brakes Squeak At Low Speed?

Your vehicle’s brakes squeak when stopping slow, but you have no idea of what is going on? There are many reasons for the squeak, and luckily, there are methods to deal with them as well.

1. Accumulation Of Moisture:-

Your brakes might make a squeaking sound when it rains or when the weather is very humid, leading to the accumulation of moisture in the brake assembly. It is also affecting where the brake pad and rotor are. Though it is not considered a big problem, but it can be annoying to some extent.

2. Layer Of Glaze:-

If your brake calipers are covered in a layer of glaze, then you will hear squeaky noises. The brakes stop the car when you push on the pedal. When there is a lot of heat and friction, they get stiff. This can cause your car to stop and make a screeching sound.

3. Car Braking Too Much:-

In the event that you brake too hard or abruptly, your car’s brake pads will wear out more quickly. Brake discs or rotors can get hot when cars brake too much. If this happens, you will hear your brakes making noise when you stop the car.

 

4. Drum Brake Lubrication:-

The shoe that connects to the backplate might need lubrication in case you hear a squeak from your brakes when you are pressing on the pedal. Let’s say the brake shoes are not properly lubricated with grease. In that case, they will start to make a noise when you apply the brakes. Because lubrication is needed to keep the parts from rubbing together and making that sound.

Brakes Squeak When Stopping Slow

5. Thinning Or Worn Out Brake Pads:-

When brake pads are too thin, they make a squeaky sound when you press the brakes. Most car manufacturers build a part called “wear indicators” in their brake systems. These tell the driver that the brake pads are wearing out and need to be replaced.

6. Debris:-

If you have a squealing sound when you apply your brakes, then something might go wrong. Just as the water gets into your brake assembly, there can be dirt, dust, grease, and so on. These “trouble guys” are more likely to affect your brakes than water getting in there. Bad enough your brakes might not work. If your brakes are making a lot of noise, or they do not work as they should, you need to get them fixed.

Hence, these are some reasons behind the brakes squeak when stopping slow.

How To Fix Brakes Squeak When Stopping Slow?

Note: Before performing any repairs, you’ll first want to determine where the squeal is coming from. To do this, roll the windows down and brake, listening for which wheel is creating the sound. The thing to remember here however is that there are more causes for squeaking in your brakes and just issues with the brake pads.

Step 1:-

If you want to change your brake pads, there are plenty of guides online that will show you how to get it done properly. Videos on youtube can walk you through the process in great detail so you can see exactly what you need to know and make sure you’re not missing any crucial steps.

Step 2:-

You need to make sure you have a floor jack and jack stands to get this done, and you’ll also need a break too as well. This is a tool that adjusts the brake caliper piston to the new brake pads and is important for ensuring that you have precisely fit brake pads when you swap to the new ones.

Step 3:-

You should replace your pads immediately when this happens, or you’ll risk having reduced stopping power. Depending on the quality of the pad, they should cost anywhere between $100 to $200 each at a shop (including labor). If you know how to replace them yourself, expect to pay between $50 to $150 for each pad.  If you don’t, check out the video below for detailed instructions.

Step 4:-

If you have glazed brake rotors and if it hasn’t yet reached this number, you will likely only need to resurface them rather than replace them. Many quick-lube-style shops only charge $10-$15 to resurface rotors. Which is a lot less costly than replacement, which usually runs around $500 or more.

Step 5:-

Another reason your new brakes might squeal is if the replacement pads are high in metal content. Most brake pads contain a mixture of different metals, including iron, steel, copper, and graphite. Depending on the ratios, they might squeal as they rub against the rotor. If you can’t handle the squeal, you might consider swapping out your brake pads for ones with less metal in them.

Step 6:-

If the lack of lubrication is causing the issue of brakes squeak when stopping slow then, To fix this, remove the drum and apply a small amount of brake lubricant to the backing plate where the piston meets the shoes. You can usually tell where the issue is by looking for signs of scraping where the bare metal is exposed.

Many drivers are intimidated by the idea of working on their own brakes because it’s a scary proposition that you might do something wrong and the brakes are the last thing you want to fix incorrectly. For that reason, there is definitely no harm and just taking your car to a mechanic to get this looked at rather than trying it on your own.

What Is The Cost Of Repairing Squeaking Brakes:-

The cost of getting brake pads replaced will generally go per axle. So, you would normally replace either your front brakes at the same time or your back brakes at the same time. You could do them all, but that will double up for the price. The average cost of replacing brake pads is around $150 to $300 per axle. This can vary greatly depending on the type of pads that you’re using.

Conclusion:-

We hope the above-mentioned information about the brakes squeak when stopping slow will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll definitely try to solve your doubts as soon as possible.

Why Does My Car Stereo Pops When Turned Off?

Everybody loves hearing music while traveling. Many people feel that music sounds better when they are on the road. Car travel gives us an excellent opportunity to catch up with the latest sounds. And enjoy a spot of musical nostalgia whilst taking in the sights. But, what if your car stereo pops when turned off, it can be really very frustrating. 

As the recent study has said that music preferences show that 58.8% of participants listen to music in the car purely because they love music. Others say they play music in the car because they like to sing during their journeys and also because it makes them feel shorter.

In this article, we’ll talk more about popping and crackling in speakers, the likely culprits, and how to fix the issues.

Why Does My Car Stereo Pops When Turned Off?

Speaker crackling or popping is almost said to be caused by a connection problem. Someplace between your amplifier and your speaker driver. There’s a bad wire which is causing the driver to move abruptly, causing interference.

There is also a possibility that the popping sound is caused by a grounding issue, or just for the simple fact that the amplifier needs to turn off before all the other equipment.

The main cause of speaker popping and crackling is interrupted current. Speakers are transducers that convert electrical energy that is audio signals into mechanical wave energy (sound waves). Audio signals are electrical signals with alternating currents.

Any kind of interruption with this alternating currents signal will cause the issue of your car stereo pops when turned off. When you switch off the power to your amplifier. It’s power supply will collapse asymmetrically which will cause the amplifier’s output to be at an indeterminate state. When it should remain at zero DC.

If your amplifier has an output relay and the popping. It is mostly noticeable when you turn it off, the problem might be in the bias of the output transistors, causing a DC drift to increase to a a significant level. This could be also heat related and the DC drift increases as the output stage heats up.

What To Do If You Face The Issue Of Your Car Stereo Popping?

A break in the car’s stereo circuit or a loose connection will cause the issue of popping or crackling sound from the system and that can be annoying and dangerous to the health of your speakers. This popping is a surge of electrical current jumping over a broken or bad wire connection, or a surge in your output settings from the amplifier.

Step 1:-

You will need, determine which speaker or speakers that are causing the problem. If the error is coming from more than one speaker. The issue will generally be in your harness wires or speaker wires or issues in your amp or equalizer. If it is only coming from one location, then you will want to check the wires and hardware of that specific one first.

If it is just an error coming from one speaker. Then it is likely not an issue with the amp or channel outputs on your stereo. If the noises are coming from multiple speakers, than you will want to check your amp outputs and channel settings. As they could be pushing too much current through the speakers causing the popping noise.

Step 2:-

If the noise occurs from multiple speakers, you will want to check the wires coming from those speakers, or the connection where those speakers hook into your sound system. If you have tried manual setting adjustments and you are still getting the noise.

You will want to check the wiring of your speakers to the stereo to make sure they are not getting grounded out somewhere. You need to check the wires coming from those speakers, or the connection where those speakers hook into your sound system.

Step 3:-

If you notice that the popping noise is only coming from one location, it is likely that this one speaker has a broken wire or connection. Simply use your tools to take the speaker out. And then check the connecting wires on the bottom for mechanical defects.

Step 4:-

If you have checked all these things, repaired all wires and connections, but you still hear the popping noise. Try connecting a different speaker of the same grade to that channel. If this alternate speaker doesn’t show the same sound error, than your speaker needs to be replaced.

Step 5:-

If the speaker you’re testing also makes popping noises, then your issue is in the wire harnessing for that speaker channel, or a deeper problem with either your amplifier or stereo system itself. In this situation, you will likely want to have a professional look at your system.

Therefore, you can solve the issue of your car stereo pops when turned off stereo by following these steps.

Conclusion:-

We hope the above-mentioned information about the car stereo pops when turned off will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll try to solve your doubts as soon as possible.

Why Does Oil Space Heater Making Clicking Noise?

Imagine outside’s weather is cold. You have a cup of hot coffee on the table, and you’re covered with your favorite blanket ready to enjoy the new web series, but when you turn on your space heater, it makes a sudden clicking sound that scares you. How can you enjoy the weather when you’re distracted by the noise? If you’re wondering why does your oil space heater making clicking noise every once in a while.

We have answers for you it is due to the expansion of the thermal fluid. Where heat is transferred over to whatever is allowing it to create higher temperatures.

Why Does Oil Space Heater Making Clicking Noise?

Although we went over the clicking noise issue, it is necessary to go over all of it in more detail so that you are entirely aware of what may or may not happen. However, all of the possible reasons for oil heaters clicking are:

1. Air bubbles:-

As you maneuver the oil heater around, the oil can shake, which essentially causes bubbles to form due to the air coming into its space. When it gets heated up, the bubbles get larger and burst, which will make a clicking noise.

2. Tiny metal pieces:-

During the heating process, there may be microscopic metal components that will cause popping but should stop once the radiator warms up.

3. Water and oil mixture:-

When you assemble the radiator in humid air, water vapor gets into the heater, creating a crackling noise. When it is turned off, the water is cooled, and the water is condensed more.

4. Loose Screws:-

When there are loose screws in your heater’s housing, the parts keep bumping into each other, making a noise. Check all the screws in the housing and brackets if your heater is mounted on the wall. If they aren’t fastened securely, the continuous vibration will make the components knock against each other, adding up to the noise.

5. 2-Point Control System:-

Most oil space heaters use a 2-point control system to regulate the temperature and prevent overheating. There is an electric switch relay wherein two pieces of metal bump into each other each time the switch is turned on and off when the temperature drops below or rises above the desired level. This is what causes the clicking sounds that you hear.

Therefore, if the popping or clicking sound continues to happen after the initial heating itself is completely done. This could be due to an electrical connection and is extremely dangerous. Keep in mind never attempt to use the radiator if it continues to click, as this could cause a short circuit and a fire.

Is It Normal For Oil Heaters To Make Clicking Or Popping Noises?

Most space heaters are made up of metal components and have a metal enclosure. The metal expands when heated and contracts once it cools. This is what causes the popping or clicking sound. It is entirely normal for these noises such as gurgling, clicking, or popping sounds to occur. This means that the metal and oil are both warming up, which is a good thing.

Aside from being a natural reaction to changes in temperature, some components are bound to create sounds as they operate. But the sounds they make are very different from the loud popping, clicking, gurgling, or squealing noises of a broken transformer. It’s best to know the difference between these sounds so that you know if you should be worried or not.

How To Fix An Oil Space Heater’s Clicking Noise Issue?

Every problem usually has a solution, isn’t it? Yes, it is let’s get a detailed format of the solution to the oil space heater making clicking noise issue. Not everyone likes the clicking noises that oil heaters make, even though it occurs for the first few minutes. If you are used to a home with little to no noise, it can be relatively frustrating to deal with overall.

Step 1:-

First of all, it is important to note that the oil being used will not explode, all of those worries about if they may explode or not should get out of your head immediately. You can safely leave them unattended, unlike many other radiators.

Step 2:-

Just make sure you look for an oil heater that has overheat protection or a tilt switch so that it can turn off whenever it starts to overheat. However, just make sure that there is no oil leakage due to the casing being damaged. There will typically be a visual if this were the case.

Step 3:-

There is a need to check the connection’s security and clean the wires if they are not damaged. If the wire has become too weak, then a replacement is needed. With the copper, make sure you renew the welded steel contacts.

Step 4:-

Check the power switch if the main power supply is still working, check to see if the switch is working properly or not. It can easily be done by connecting something else to the switch and seeing if it works.

Step 5:-

On the contrary, you can fully replace the convector to save you from the annoying noises, if you wish to go that route. It may very well be more cost-effective to get an entirely new one than to have someone fix the issue at hand.

Step 6:-

You need to unplug your heater and check the fuse box for any blown fuses that might have caused the oil space heater making clicking noise. You are going to replace or restart the fuse. Plug your device back in after doing this.

Hence, these are some helpful tricks that you can use to correct the issue of the oil space heater making clicking noise.

Conclusion:-

In the summer season, oil heaters click because of the air bubbles when you maneuver them around, water and oil mixture from when being initially installed, or tiny metal pieces that go into the oil itself which leads to the oil space heater making clicking noise. If this problem continues to do so, and in this case, get a professional involved or replace the item in its entirety.

We hope the above-mentioned information will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll definitely try to solve your doubts as soon as possible.

Why Does Chevrolet Trailblazer Making Whistling Noise?

The single biggest reason why many of us love cars. It is the fact that owning one gives you an immediate and newfound sense of freedom. Especially, Americans are known for their obsession with buffed-up things. Their love for cars is of the next level. They love their trucks. But trucks are more utilitarian and hence came a specimen called the Chevrolet El Camino. a pickup and a car fused in one. Chevrolet too has launched the new Trailblazer here in India.

If you own one and what if your Chevrolet trailblazer making whistling noise? Though every one of us loves buying new cars after a while, those cars turn out to be a depreciated investment as and when problems related to the cars start occurring.

Reasons Behind Chevrolet Trailblazer Making Whistling Noise?

If your Chevy Trailblazer is experiencing a whining or whistling noise, it is often going to be caused by something in the engine compartment. A whistling sound when accelerating is almost always caused by a bad accessory attached to your Trailblazer’s engine.  Here are the most common causes of whining noises when accelerating.

Your transmission is responsible for making your car move it transfers the power from the engine to the wheels. During normal operations, you’ll hear at least some noise. However, when it begins making unusual sounds, particularly a whistling noise when in gear, it’s a sign that there is something wrong.

1.  Bad Alternator:-

When an alternator goes bad, it’ll often begin to put out a high-pitched whistling sound. It should also be accompanied by a battery light. If not, it may not be the alternator making your trailblazer whistle, although it doesn’t rule it out entirely.

2.  Power Steering:-

The power steering pump is a very common reason why your chevrolet trailblazer making whistling noise when accelerating. If it gets too low on the fluid they’ll make it’ll whistle a lot. You need to check the fluid level and fill it back up to the factory fill line.

3.  Water Pump:-

When the water pump goes bad, it’ll make a squeaking or whistling sound. It’ll often sound like a deeper whine than a bad alternator.

4.  Worn Serpentine Belt:-

The Trailblazer’s serpentine belt is responsible for taking the motion from the crankshaft and using it to turn all of your accessories. When it goes bad, it’ll cause a high-pitched whistle sound. This is particularly true when you first start the vehicle.

5. Low Transmission Fluid:-

For both manual and automatic transmissions, the primary cause for trailblazers making whistling noise is in gear low transmission fluid. If the fluid is too low, then the internal components of the transmission are not lubricated properly. What you’re hearing is friction between those parts, and it can lead to significant damage. If the fluid is low, it’s advised to check for transmission fluid leaks.

6. Worn Clutch and/or Flywheel:-

If you drive a manual transmission, there’s the possibility that your clutch is worn out and/or your flywheel needs to be resurfaced. When these components begin to wear, it’s possible to hear whining, grinding, whistling, and other abnormal sounds.

7. Bad Wheel Bearing:-

The Wheel bearings are located in each wheel hub, but the sound can travel and seem as though it’s coming from the transmission. It’s more usual for a failing wheel bearing to create a roaring sound, but they can create a whine or whistle while driving.

8. Bad Input Shaft Bearing:-

This is an internal bearing within the housing of the transmission, and it can create a whistling or whining sound when it begins to fail.

Hence, these are some basic reasons which might be responsible for your chevrolet trailblazer making whistling noise.

How Much Does A Whistling Sound When Car Be In Gear Inspection Cost?

On average, the cost for a chevrolet trailblazer making whistling noise when the car is in gear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

How To Deal With The Issue Of Trailblazer Making Whistling Noise?

Or else leave it overnight. When the technician starts the engine the next morning, have him or her squirt water at every gasket seam and connection point in the intake system. If the whistle is caused by an intake leak, the water will temporarily seal the leak and the noise will stop for that instant.

Conclusion:-

We hope the above-mentioned information about why chevrolet trailblazer making whistling noises will be helpful to all the readers. If anybody’s doubts persist feel free to comment in the comment section below. We’ll try to solve your doubts as soon as possible.

Why Do You Hear A Loud Pop When Putting Car In Reverse?

If you are wondering what to do if your car makes a loud pop when putting car in reverse. Then you are on the correct page. Basically, it is a problem of a bad valve body which causes the problem of a loud bang sound while reversing your car. It can be changed without pulling the transmission. This sound is mainly caused while putting the automatic transmission in reverse or in the drive.

In this article, we will be discussing this problem in detail. You will get to know the reasons for this cause of the loud pop issue while reversing your car. And how to get this problem fixed.

What Causes A Loud Pop When Putting Car In Reverse?

For eg. If you’re parking your car in the office parking area or at the shopping mall. While doing so you might notice a big popping sound coming from the rear of your vehicle while shifting into reverse gear. This issue can be an alarming sign for you and make you wonder why this sound occurs.

We’ll take an in-depth look at why you might hear this loud pop when putting car in reverse. Because it is coming from your car’s transmission and is the most common problem which you’re not facing alone.

The reasons behind this problem are the following.

1. However, too much movement between the pad abutment and caliper surface can lead to continuous noise.

2. The absence of anti-rattle chips could also cause a clicking noise while putting your car in reverse.

3. Not replacing anti-rattle chips while changing the brakes can cause popping noise. Make sure to do so.

4. The popping sound is caused by your transmission while synchronizing its gears. 

5. Usually, when you press on the gas pedal in reverse and go into first gear, that popping noise occurs.

6. Your car consists of three types of transmissions which are manual, automatic, and continuously variable transmissions (CVT). Each transmission works differently and each transmission will create different sounds as they attempt to engage its gears.

7. If you have a standard manual transmission with more than three gears, though, sometimes it gets stuck in second gear instead of going straight to reverse because of which this problem of loud pop sound arises.

8. There is also a possibility of an old brake pad causing this issue as it rubs against the rotor and creates a high-pitched noise.

9. A brake problem might also be the possible cause of this loud pop sound problem.

Therefore, these are the certain problems that can be the reason for causing this annoying loud pop sound while reversing your car.

How To Resolve This Loud Pop Sound Issue While Reversing Your Car?

Though everyone loves to ride in the car. But there are certain problems that can be caused by a specific period of time. And, the loud pop sound coming out while reversing your car is one of the most common problems. You can get it fixed by following the below steps.

1. By Adding The Grease:-

The Clicking sound is one of the most common noises you’ll hear while reversing the vehicle. You can try to resolve this issue by adding a disk brake caliper grease. The grease helps to lubricate the brakes and eliminates the noise. Ensure that you apply the lubricant on both sides of the greasing shims to avoid any problem with the brake pads. Remember not to use too much grease as it might lead to a large, sticky built-up.

2. By Checking The Wear Tabs:-

The first thing you need to check is the wear tabs. If the car makes noise when backing up or even while moving forward, wear tabs might be the reason for this concern. Basically, they are located at the end of the brake tabs and will rub against the rotor by creating a squealing noise.

3. By Checking The Metal:-

Firstly, you need to check the car rotor and pads, and if there is a small metal part between the two, the noise will be squealing. A squealing noise can occur when the metal touches the metal. Please ensure that you clean the rotor and pads to prevent any metal parts from getting in between both.

Thus, if the car makes noise when reversing every time, these tips can definitely help you to avoid this issue of loud pop sound while putting the car in reverse.

Conclusion:-

We hope the above-mentioned information regarding the loud pop when putting car in reverse problem will be helpful to all the viewers. If you have any more doubts or queries regarding this problem feel free to comment in the comment box. We’ll definitely try to reach up to you and solve your all doubts as soon as possible.

Thank You!

Why Does Car Makes A Ticking Noise When Letting Off Gas?

If you are wondering what can be the reason behind this annoying ticking noise when letting off gas of your car? then you are on the correct page. In this article, we are going to discuss the real reason behind this cause and how to get it fixed properly in detail. Let’s get started with the article without any further delay.

Reasons Why You Hear Ticking Noise When Letting Off Gas?

A car engine will make noises and it is common after all there are many moving components and parts inside of a vehicle when it is running. Most of the sounds are very common and there is nothing to worry about. But it can be a problem for you if these noises start sounding a bit different or unusual.

In most cases, a ticking or tapping noise generally occurs from the two areas that are from the top of the motor or the axle shaft area of the car. The ticking noise can occur is because of a lack of oil lubrication in the top of the motor or because of the loose valve train hardware like lifters.

Let’s take an in-depth look into some common problems.

1. Bad Reciprocating Components:-

The reciprocating component is mostly responsible for ticking or tapping noises in the vehicle. When there is a ticking noise in the engine and it concerns a particular component, then it will usually be a reciprocating component that is to blame and not a rotating component.

Some examples of reciprocating components include pushrods, pistons, and valves. If any of these components are worn out, damaged, or go bad for whatever reason, you will begin to hear ticking noises. If you don’t replace these components in a timely manner, the ticking noises may progress into a whining or clunking noise.

2. Rod Knocking:-

The ticking sound is caused by the bearing attached to the rod having gone bad, then the rod will knock around and cause a ticking sound. This happens if you have a worn-out bearing because it will cause the rod to move. There won’t be any temperature changes to the engine, but the RPM of the engine will change.

3. Lack Of Oil Lubrication:-

Every engine needs oil between its moving parts to work smoothly. Oil not only reduces friction but, also carries away heat. If there is a lack of oil lubrication in the engine it will definitely lead to cause this type of ticking noise problem. The oil is the primary means by which the rod and main bearings as well as the pistons of the car are cooled.

4. Valves Not Adjusted:-

A valve train that is not adjusted will cause ticking sounds. When your engine spins a couple of times, the valves open and close. There is something called a rocker’s arm that is responsible for opening and closing the valves. The camshaft has a pushrod that controls the rocker’s arm and it needs to be the precise distance from the valve.

This is especially true because the valves move so fast and at a short distance. If the adjustments are not exactly right, then the components will move around and cause the ticking sounds.

5. Fuel Injectors Firing:-

Certain model cars with a fuel injection system will have ticking sounds whenever the fuel injectors start firing. These are basically the valves of the injectors that are quickly opening and closing in order to allow the proper fuel amount to enter the internal combustion chamber.

6. Damaged CV Joints:-

If a CV joint begins to fail while driving, your car will start to pull to one side as one wheel loses power. When the joint breaks completely its corresponding wheel will stop working completely. Although the engine may still run, the car will be unable to move. It is one of the basic reasons behind ticking noise when letting off gas issue.

7. Warped Rotor:-

If the car’s rotor is warped, even a little bit, every time the high point in the rotor comes around, it pushes the brake pads back against the caliper which is responsible for making the ticking sound.

8. Exhaust Leaks:-

When the fuel is combusted, it has to be expelled in a controlled manner. If there is a leak in the exhaust manifold, a ticking noise could be produced. An exhaust leak can occur anywhere in the exhaust system. However, if the leak is in the exhaust manifold, it may present a ticking noise from the engine compartment.

9. Bad Spark Plugs:-

Spark plugs that do not work properly, much like misaligned valves will cause the engine to misfire. If you have recently changed your spark plugs and hear a ticking sound it’s possible that the spark plugs were incorrectly installed.

If a spark plug is loosely fitted or cracked, the combustion and exhaust gases can bypass the seal, causing a ticking noise.

Hence these are some reasons which can be responsible for this ticking noise when letting off gas problem.

How To Resolve This Problem Of Ticking Noise?

Anyone car lover will clearly tell you that one of the best things about driving a car is hearing the sound of the engine roaring. Unfortunately, that “roar” can sometimes turn into a ticking noise. If you hear ticking or tapping noises when letting off the gas pedal then you can try to get fix this issue by following these methods.

Step 1:-

Firstly, check your oil level and ensure it is full because your vehicle most likely uses hydraulic lifters, which rely on oil pressure. Low engine oil leads to low pressure. If a lifter isn’t damaged then the increase in oil pressure will alleviate the noise you’re hearing. If it persists, use a heavier oil it will build a better pressure.

Step 2:-

Check if the noise occurs when downshifting and also see if the noise occurs in reverse or not. If it happens on letting off the throttle and having a little float on the gears, then the differential gears could be walking around.

Step 3:-

The Exhaust leak can simply be “patched up” by a mechanic. If the exhaust manifold gasket is leaking, you need to get it replaced at a relatively cheap cost.

Step 4:-

Adjust the valvetrain. It can be done as a DIY project if you have the necessary tools and patience. If you decide to let a professional fix it, it will cost you about $80 to $150.

Step 5:-

If the spark plugs are found to be bad, you need to either replace or repair. It can be expensive though.

Step 6:-

Check the bearing which is attached to the rod. If it is the reason behind this ticking issue you need to rebuild your entire motor.

Hence, these are some following resolving hacks for fixing these issues.

Conclusion:-

We hope the above-mentioned information will help the readers to learn more about this issue in detail. If anyone has any more doubts related to this problem feel free to comment in the comment section. We’ll definitely try to reach up to you and solve all your doubts as early as possible.

My Back Wheel Sounds Like Helicopter, What To Do?

Though each and every one of us loves buying new cars after a while, those cars turn out to be a depreciated investment as and when problems related to the cars start occurring. What if your back wheel sounds like helicopter while actually driving on the road. It turns out into a liability after a specific period of time. It can be quite frustrating when dealing with those car problems and their repairs. However, it can get even more frustrating when you don’t know the reason behind what is wrong with your vehicle.

It can be an alarming sign for you if all of a sudden your car starts to sound different than usual, especially like a helicopter. If this kind of problem ever arises with your car then you’re on the right page. In this article, we will be discussing this problem in detail.

What Is The Cause Of The Helicopter Noise Coming From The Car?

There could be several things which can cause this problem of helicopter noise. It could be due to the following.

1. Warped Brake Caliper:-

The warped brake caliper can cause the problem of the grinding sound like a helicopter. It causes the rotor to grind against the inside of the disc. Due to this problem, it may even lock up the wheels while putting on the brake. It can be easily noticeable as there is a significant decrease in braking effectiveness.

2. Car With Bad Brakes:-

If your car has bad brakes you will be unable to grip the rotor properly on a surface full of gunk and rust. Due to this issue, it will make your car sound annoyingly like a helicopter.

3. Failing Of Wheel Bearing:-

This problem mostly arises when the car is in motion or taking turns. Because when we take various turns while driving it causes an extra resistance on the one side of the tire while the other remaining tire spins freely. If you are suspecting of this problem then just check which side of your vehicle is making a sound.

4. Faulty Blower Fan Motor Of The Car:-

If there is a cause of this problem in your vehicle then you definitely need to get your car checked by the professionals themselves. It can be a little costly for you when you suspect this problem. Due to this faulty blower fan motor, it will make your vehicle sound like a helicopter when it turns on and off. If your car is malfunctioning it may also speed up and speed down suddenly without any warning while driving the vehicle and it can be really very dangerous.

5. Malfunctioning Of The Car’s Parking Brake:-

The problem of malfunctioning the car’s parking brake is difficult to determine but it can be noticeable if you are able to find out that the emergency brakes are engaged and the regular brakes are not engaged. You need to see a professional for this problem when the car’s parking brake starts engaging and disengaging on its own.

 6. Worn Brake Rotor:-

This problem of a worn brake rotor can also cause the rotor to grind against the inside of the disc. This problem can be easily noticeable as and when your car starts vibrating while putting on the brake or while stopping the car. When this problem arises the brake pad wears down, and it begins to leave a more significant gap between itself and the caliper by causing the pads to hit the rotor closer to the outside.

What To Do If Your Back Wheel Sounds Like Helicopter?

This helicopter noise issue is mostly caused because of the bad condition of the brakes or because of the wheel bearings. You can get this problem fixed but at the times it can be very pricey. Below there are some steps to get your problem resolved.

1. The first thing you need to inspect is whether there is proper tire inflation in the car is their or not because tires make strange noises when they are low or damaged.

2. The Second thing you need to check is the brakes. A bad brake, warped caliper, or rotor. You also need to determine the issues with the parking brake that can cause noises related to the tires rotating.

3. After that you need to look for a dragging or damaged brake pad or shoe and inspect all the hardware. Before driving your car just make sure that your parking brake is functioning correctly.

4. You should look at the working of the wheel bearings if the brakes are working properly for that you will need to lift the vehicle up in order to perform those tests. This is the only way to do a proper visual inspection and is the best way to test the wheel bearings.

5. If your back wheel sounds like helicopter, just call out one of the professionals themselves for diagnosing the sound firsthand who will help you out to fix this issue.

Conclusion:-

We hope the above-mentioned information will help and guide all the viewers to deal with this problem and We also, except that if you will properly follow these steps then there is no chance of saying that back wheel sounds like helicopter for sure. The above-mentioned information and steps will definitely help you in fixing the helicopter noise issue from the car.

Make sure that you read and follow the details properly or if you have any more doubts or queries related to this problem feel free to comment below in the comment section. We’ll definitely try to reach up to you and help you out as soon as possible.

THANK YOU!